Modify Selection
- Equipment, tools, and parts:
- Instruments
- or
- Gas measurement instruments
- or
- CO2 meters
- or
- CO meters
- or
- NO2 meters
- or
- Methane monitors
- or
- NOx meters
- or
- Particle detectors
- or
- FTIR
- or
- Microscopes
- or
- Transmission electron microscopes
- or
- Extensometers
- or
- Geophones
- or
- Carbon measurement instruments
- or
- Aethalometers
- or
- Seismometers
- or
- Sound measurement instruments
- or
- Dosimeters
- or
- Sound level meters
- or
- Ground penetrating radar
- or
- Borescope
- or
- Vibration meters
- or
- Temperature measurement instruments
- or
- Temperature sensors
- or
- Transducers
- or
- Time measuring instruments
- or
- Dust measurement instruments
- or
- CDEM
- or
- Personal dust monitors
- or
- Light scattering dust monitors
- or
- Air flow measurement instruments
- or
- Anemometers
- or
- Calibration instruments
- or
- Strain gauges
- or
- Smoke sensors
- or
- Seismographs
- or
- Pressure measurement instruments
- or
- Pressure gauges
- or
- Accelerometers
- or
- TEOM
- or
- Data loggers
- or
- Particle sizing instruments
- or
- Scanning mobility particle sizers
- or
- Radiation detectors
Home Links
Results 201 - 210 of 220
-
1/1/1995 - Information CircularsTo help evaluate the usefulness of the natural gamma radiation (NGR) technique for the coal interface detection (CID) project, the U.S. Bureau of Mines (USBM) collected data from various mining companies conducting underground and surface operations.
-
1/1/1995 - Conference papersIn addition to developing various types of cool-interface detection systems, the US Bureau of Mines is actively involved in developing a coal rib-thickness monitoring system for highwall mining applications. One particular system to detect the coal-air ...
-
3/1/1994 - Conference papersThis paper describes a general purpose imaging technology developed by the U.S. Bureau of Mines (USBM) that, when fully implemented, will solve the general problem of 'seeing into the earth.'
-
1/1/1992 - Information CircularsAn report on the evaluation of smoke detectors placed in conveyor belt entries of underground coal mines. Recommendations for performance standards, sensitivity tests, detector classification and maintenance are also presented.
-
1/1/1992 - Information CircularsA U.S. Bureau of Mines investigation of Fourier transform infrared (FTIR) spectroscopy for on-filter analysis of respirable dust.
-
1/1/1992 - Reports of InvestigationsRoof and floor contact pressure provided by the interaction of a shield with the surrounding strata are examined. Controlled forces were applied to an 800-ton two-leg shield using a mine roof simulator.
-
1/1/1992 - Reports of InvestigationsAs part of an investigation aimed at improving the health and safety and competitiveness of the mining industry, the U.S. Bureau of Mines evaluated the application of common offset radar profiling, using a 250-MHz ground-penetrating radar (GPR) system, ...
-
1/1/1990 - Reports of InvestigationsThe Bureau of Mines preproduction wireless survey system (WSS) and its performance during an in-mine test are discussed in this report. The WSS was developed to reduce downhole surveying time in order to increase the efficiency of drilling long horizont...
-
1/1/1988 - Reports of InvestigationsThe Bureau of Mines has developed a system using a high-speed electropneumatic mechanism for the rapid (grab) sampling of dusts and gases during an explosion to monitor pyrolysis-charring in coal particles and combustion of pyrolysis vapors.
-
1/1/1987 - Reports of InvestigationsThe Bureau of Mines has developed a practical methodology for determining occluded gas contents of domal rock salt samples. The method, which is portable and fieldworthy, provides results in 5 min or less.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program