Modify Selection
- Hazard prevention and control:
- Rock dusting
- Document types:
- Conference papers
Home Links
Results 1 - 5 of 5
-
6/1/2010 - Conference papersThis paper discusses factors that could result in a potential undetected dust explosion hazard, when using current dust sampling procedures, in an area that otherwise appears to be adequately protected with rock dust.
-
11/1/2009 - Conference papersNIOSH has investigated several areas in which current practices may need to be updated to adequately protect mines against coal dust propagated explosions. Other closely related issues, such as rock dust testing methods, are also discussed.
-
8/1/2006 - Conference papersNIOSH and MSHA conducted a joint survey to determine the range of coal particle sizes found in dust samples collected from intake airways of U.S. coal mines.
-
9/1/2010 - Conference papersNIOSH conducted large-scale explosion experiments at the Lake Lynn Experimental Mine to investigate the inerting effect of limestone rock dust. Flame travel was measured using a conventional test and results were compared to a newer method.
-
1/1/2006 - Conference papersNIOSH's Office of Mine Safety and Health Research, in collaboration with MSHA Technical Support, has devised a prototype handheld device, Coal Dust Explosibitlity Meter (CDEM), to assess the potential explosibility of a coal and rock dust mixture.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program