Modify Selection
- Equipment, tools, and parts:
- Instruments
- or
- Gas measurement instruments
- or
- CO2 meters
- or
- CO meters
- or
- NO2 meters
- or
- Methane monitors
- or
- NOx meters
- or
- Particle detectors
- or
- FTIR
- or
- Microscopes
- or
- Transmission electron microscopes
- or
- Extensometers
- or
- Geophones
- or
- Carbon measurement instruments
- or
- Aethalometers
- or
- Seismometers
- or
- Sound measurement instruments
- or
- Dosimeters
- or
- Sound level meters
- or
- Ground penetrating radar
- or
- Borescope
- or
- Vibration meters
- or
- Temperature measurement instruments
- or
- Temperature sensors
- or
- Transducers
- or
- Time measuring instruments
- or
- Dust measurement instruments
- or
- CDEM
- or
- Personal dust monitors
- or
- Light scattering dust monitors
- or
- Air flow measurement instruments
- or
- Anemometers
- or
- Calibration instruments
- or
- Strain gauges
- or
- Smoke sensors
- or
- Seismographs
- or
- Pressure measurement instruments
- or
- Pressure gauges
- or
- Accelerometers
- or
- TEOM
- or
- Data loggers
- or
- Particle sizing instruments
- or
- Scanning mobility particle sizers
- or
- Radiation detectors
Home Links
Results 1 - 10 of 220
-
4/18/2013 - Training materials, Videos and multimediaThis is a series of 5 videos explaining how to use the coal dust explosibility meter.
-
8/15/2012 - Information CircularsThis IC details a NIOSH investigation on the CDEM’s ability to accurately predict the explosibility of coal and rock dust mixtures. The conclusions support the field use of the CDEM to measure the explosibility of coal and rock dust mixtures.
-
5/1/2012 - Reports of InvestigationsA new test method has been developed by the National Institute for Occupational Safety and Health (NIOSH) and Clean Air Filter (CAF) for quantifying the outside air leakage into environmental cab filtration systems.
-
2/4/2012 - PC softwareSoftware to simplify the record-keeping and analysis associated with time-motion studies and worker noise exposures, making it easier to identify and solve noise problems.
-
1/1/2012 - Peer reviewed journal articlesMiners face a variety of respiratory hazards while on the job, including exposure to silica dust which can lead to silicosis, a potentially fatal lung disease.
-
5/1/2011 - Peer reviewed journal articlesThis paper discusses the impact of ventilation airflow on alarm times of the smoke detectors and video cameras, CO levels, smoke optical densities and smoke obscuration, total smoke mass concentrations, and fire heat release rates.
-
10/1/2009 - Peer reviewed journal articlesInstruments remaining in a test section of a lead/zinc/copper room and pillar mine where pillar mining had taken place 14 years before were read to monitor long-term stability and quantify time dependent behavior in the mine roof and backfill.
-
2/1/2009 - Conference papersThis report describes experiments and their results in determining the responses of a prototype smoke detector and a commercially available photoelectric smoke detector to smoke particles generated from various combustion sources.
-
10/1/2008 - Peer reviewed journal articlesThis paper describes the testing and reliability of results of a NIOSH developed Coal Dust Explosibility Meter (CDEM), a hand-held instrument that uses optical reflectance to measure the explosibility of a rock dust and coal dust mixture.
-
1/1/2008 - Peer reviewed journal articlesThe work presented in this paper focuses on the relationship between the PDM and respirable dust concentrations currently measured by a coal mine dust personal sampler unit utilizing a 10 mm Dorr Oliver nylon cyclone.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program