Modify Selection
- Hazard prevention and control:
- Administrative controls
- or
- Hazardous materials management
- or
- Emergency planning
- or
- Preparedness checklists
- or
- Site security
- or
- Work design
- or
- Proper work techniques
- or
- Exposure tracking
- or
- Safety culture
- or
- Safety incentives
- or
- Employee management
- or
- Hazard recording
- or
- Health and safety programs
- or
- Hearing conservation programs
- or
- Materials storage
- or
- Policies
- or
- Standards
- or
- Inspections
- or
- Work scheduling
- or
- Work breaks
- or
- Task rotation
- or
- Communications
- or
- Signalling
- or
- Hand signalling
Home Links
Results 191 - 200 of 223
-
2/1/1982 - Contract reportsAn evaluation was made of one of several improved underground communication systems sponsored by the U.S. Bureau of Mines. The system was installed in a typical metal-nonmetal, room-and-pillar mine and utilized ultrahigh frequency repeaters connected to...
-
11/1/1981 - Contract reportsA prototype detector using electromagnetic signals for finding trapped miners has previously been built and tested. The signals are generated from transmitters carried on the miner's belt and powered by his head lamp battery and the receiver is a human ...
-
4/1/1981 - Contract reportsThis report presents test results, data evaluations, and typical system performance expectations based on wireless electromagnetic propagation measurements performed in the MAGMA Copper Company San Manuel mine near Tucson, Arizona during March 30 throug...
-
3/1/1981 - Contract reportsThis report describes the design and implementation of UHF radio and closed-circuit television systems in the Black River room and pillar limestone mine near Butler, Pendleton County, Kentucky.
-
2/1/1981 - Contract reports, Open File ReportsA survey of electromagnetic noise reports was performed and a summary of the results are given.
-
1/1/1981 - Contract reportsThis report describes the results of a measurement and analysis program to characterize wireless radio transmission in metal-nonmetal mines over a wide frequency range from 0.2 to 1,000 mhz and over a variety of mine environments.
-
10/1/1980 - Contract reportsThe object of this program was to extend the capabilities of visual paging systems both in size and functions in mines. The system developed uses the mine pager phone line for communication, monitoring, and remote control. The system was designed to be ...
-
7/1/1980 - Contract reportsThis report assesses the expected detectability, on the surface above mines, of electromagnetic signals produced in the 630- to 3,030-hz frequency band by a rescue transmitter activated by miners trapped underground. The implications of the results and ...
-
6/1/1980 - Contract reportsThe objective of this project was to develop technical data and evaluate performance and utility of leaky feeder communications systems currently used in U.S. underground mines.
-
1/15/1979 - Contract reportsCharacteristics of metal-nonmetal mines were evaluated to determine the suitability of applying the Bureau of Mines electromagnetic (em) location system to locating trapped miners.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program