Modify Selection
- Hazard prevention and control:
- Administrative controls
- or
- Hazardous materials management
- or
- Preparedness checklists
- or
- Proper work techniques
- or
- Acclimatization
- or
- Health and safety management
- or
- Safety culture
- or
- Safety incentives
- or
- Employee management
- or
- Worker participation
- or
- Health and safety programs
- or
- Hearing conservation programs
- or
- Behavior safety programs
- or
- Materials storage
- or
- Standards
- or
- Inspections
- or
- Regulations
- or
- Work scheduling
- or
- Work pace control
- or
- Task rotation
- or
- Communications, location tracking, and signalling
- or
- Communications
- or
- Emergency communications
- or
- Personnel tracking
Home Links
Results 151 - 160 of 282
-
4/1/2009 - Peer reviewed journal articlesIn this study, the operators of a limestone mine retrofitted a loader used for clean-up operations with a passive DPF that was lightly catalyzed and used a fuel additive to initiate regeneration at low exhaust temperatures.
-
2/1/2009 - Peer reviewed journal articlesThe results of this study by NIOSH have served to provide performance data in support of the procedures described in the international standard methods, for which such results were previously unavailable in the peer-reviewed literature.
-
1/1/2009 - Historical information, PublicationsNIOSH researchers reviewed mining fatality surveillance data from the period 1900-2006, and using MSHA reports collected additional data on the deaths and circumstances associated with the Sago, Alma, and Darby incidents. They also reviewed published ma...
-
1/1/2009 - Conference papersThis paper introduces two position adjustment methods for mine tracking systems which use a coplanar node-path network mine model as the foundation for their development.
-
12/1/2008 - Peer reviewed journal articlesThis case study provides an example of how social marketing was applied to meet the needs of business customers in the mining industry.
-
10/1/2008 - Information CircularsThis NIOSH pilot project demonstrated that most US mines have the capability to successfully implement an MHRA. The basic requirement for a successful MHRA is the desire to become more proactive in reducing risks associated with catastrophic events.
-
6/1/2008 - Conference papersThis paper describes research conducted to compare the performance, including response time and accuracy, of selected instruments using infrared and catalytic sensors.
-
6/1/2008 - Unpublished documents and reportsThis document supports Code of Federal Regulations (CFR) proposed rule making for the CPDM.
-
6/1/2008 - Reports of InvestigationsThis report is the last of 10 report phases begun in 1982 and presents findings regarding laboratory-tested SCSRs in the tenth phase of testing, from July 2004 to March 2006.
-
3/1/2008 - NIOSH/USBM numbered publicationsThis user manual explains objectives that can be addressed with the NIOSH Hearing Loss Simulator and training scenarios applied to real-life, real worker scenarios. This guide explains the simulator's functions in detail.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program