Modify Selection
- Hazard prevention and control:
- Administrative controls
- or
- Hazardous materials management
- or
- Preparedness checklists
- or
- Site security
- or
- Work design
- or
- Proper work techniques
- or
- Acclimatization
- or
- Exposure tracking
- or
- Safety culture
- or
- Safety incentives
- or
- Employee management
- or
- Accident and injury recording
- or
- Health and safety programs
- or
- Behavior safety programs
- or
- Materials storage
- or
- Policies
- or
- Regulations
- or
- Work scheduling
- or
- Work breaks
- or
- Task rotation
- or
- Clothes cleaning
- or
- Communications
- or
- Emergency communications
- or
- Hand signalling
Home Links
Results 1 - 10 of 230
-
5/9/2019 - Training materialsThis tutorial provides an advanced discussion of the available CT technologies, operating characteristics and general system performance considerations with descriptions of specific uses for primary and secondary communications.
-
3/11/2014 - Reports of InvestigationsThe Report of Investigations details the results of a NIOSH investigation of purging in mobile refuge alternatives.
-
2/1/2012 - Technology NewsMedium frequency communications systems do not require a powered underground infrastructure to be installed for operation, and may therefore provide a higher degree of survivability after a mine disaster than other types of systems.
-
12/1/2010 - Peer reviewed journal articlesNIOSH research indicates that LEDs can enhance safety by improving a miner’s ability to see hazards and by reducing glare. This paper considers whether LEDs can also reduce miner exposure to hazards during maintenance and operation of LED lighting.
-
1/1/2010 - Book chaptersThis paper describes how miners' safety and health training has improved since the beginning of the program in the late 1970's after the Federal Mine Safety legislation was passed, and identifies areas where further improvements are needed.
-
8/1/2009 - Peer reviewed journal articlesThe purpose of this study was to perfect a method of gathering information on work positions and Visual Attention Locations needed by operators during the cutting phase and while the continuous miner trams to a new location.
-
11/1/2008 - Conference papersThis article discusses how narrative-based training has evolved and is likely to continue changing in the future using the Underground Coal Mine Map Reading Training (UCMMRT) developed by NIOSH.
-
6/1/2008 - Conference papersThe paper provides: (a) a description of the gas pressure-based design approach to blasting, (b) a simple technique for estimating the damage radius of the buffer row of holes, and (c) a discussion of smoothwall design for the contour row of holes.
-
6/1/2008 - Conference papersAn alternative method to the original system developed by NIOSH and Unimin Corp to provide for a stand-alone clothes cleaning system.
-
6/1/2007 - Reports of InvestigationsNIOSH studied technology and methods that could reduce accidents involving surface mining equipment. These proximity warning systems included radar, sonar, GPS, radio transceiver tags, and combinations of radar and cameras.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program