Results 1 - 10 of 208

• Advanced Tutorial on Wireless Communication and Electronic Tracking: Introduction
  5/9/2019 - Training materials
  This tutorial provides an advanced discussion of the available CT technologies, operating characteristics and general system performance considerations with descriptions of specific uses for primary and secondary communications.
• Proximity Warning Systems for Mining Equipment
  9/27/2012 - Conferences, workshops, and seminars
  NIOSH OMSHR sponsored a free, one-day workshop to discuss proximity warning and detection systems for mining equipment.
• Technology News 546 - Medium Frequency Mine Emergency Communications - An Emerging Technology
  2/1/2012 - Technology News
  Medium frequency communications systems do not require a powered underground infrastructure to be installed for operation, and may therefore provide a higher degree of survivability after a mine disaster than other types of systems.
• Diesel Aerosols and Gases in Underground Mines: Guide to Exposure Assessment and Control
  10/1/2011 - Guides and manuals, Reports of Investigations
  A comprehensive guide to establish a program to curtail diesel particulate matter emissions, control pollutants after release in an underground mine environment and reduce exposures using administrative controls.
• Practical Demonstrations of Ergonomic Principles
  7/1/2011 - Reports of Investigations
  This document consists of a series of demonstrations designed to complement training on ergonomic principles.
• Recommendations for a New Rock Dusting Standard to Prevent Coal Dust Explosions in Intake Airways
  5/1/2010 - Reports of Investigations
  This NIOSH report presents the results of extensive in-mine coal dust particle size surveys of dust samples collected from intake airways in 61 U.S. coal mines, representing all 10 MSHA bituminous Coal Mine Safety and Health Districts.
• A Review of NIOSH and U.S. Bureau of Mines Research to Improve Miners' Health and Safety Training
  1/1/2010 - Book chapters
  This paper describes how miners' safety and health training has improved since the beginning of the program in the late 1970's after the Federal Mine Safety legislation was passed, and identifies areas where further improvements are needed.
• Continuous Mining: A Pilot Study of the Role of Visual Attention Locations and Work Position in Underground Coal Mines
  8/1/2009 - Peer reviewed journal articles
  The purpose of this study was to perfect a method of gathering information on work positions and Visual Attention Locations needed by operators during the cutting phase and while the continuous miner trams to a new location.
• Working in the Classroom - A Vision of Miner Training in the 21st Century
  11/1/2008 - Conference papers
  This article discusses how narrative-based training has evolved and is likely to continue changing in the future using the Underground Coal Mine Map Reading Training (UCMMRT) developed by NIOSH.
• A Gas Pressure-Based Drift Round Blast Design Methodology
  6/1/2008 - Conference papers
  The paper provides: (a) a description of the gas pressure-based design approach to blasting, (b) a simple technique for estimating the damage radius of the buffer row of holes, and (c) a discussion of smoothwall design for the contour row of holes.