- Hazard prevention and control:
- Administrative controls
- or
- Hazardous materials management
- or
- Preparedness checklists
- or
- Work design
- or
- Proper work techniques
- or
- Acclimatization
- or
- Exposure tracking
- or
- Health screening
- or
- Health and safety management
- or
- Safety incentives
- or
- Employee management
- or
- Accident and injury recording
- or
- Hazard recording
- or
- Hearing conservation programs
- or
- Behavior safety programs
- or
- Materials storage
- or
- Standards
- or
- Inspections
- or
- Work scheduling
- or
- Work pace control
- or
- Task rotation
- or
- Clothes cleaning
- or
- Communications, location tracking, and signalling
- or
- Communications
- or
- Emergency communications
- or
- Personnel tracking
Results 1 - 10 of 247
-
4/7/2023 - PC software, Reports of InvestigationsEVADE 2.4 has been updated with expanded video and data features to make it a more generalized and powerful tool.
-
5/9/2019 - Training materialsThis tutorial provides an advanced discussion of the available CT technologies, operating characteristics and general system performance considerations with descriptions of specific uses for primary and secondary communications.
-
9/27/2012 - Conferences, workshops, and seminarsNIOSH OMSHR sponsored a free, one-day workshop to discuss proximity warning and detection systems for mining equipment.
-
2/1/2012 - Technology NewsMedium frequency communications systems do not require a powered underground infrastructure to be installed for operation, and may therefore provide a higher degree of survivability after a mine disaster than other types of systems.
-
10/1/2011 - Guides and manuals, Reports of InvestigationsA comprehensive guide to establish a program to curtail diesel particulate matter emissions, control pollutants after release in an underground mine environment and reduce exposures using administrative controls.
-
12/1/2010 - Peer reviewed journal articlesNIOSH research indicates that LEDs can enhance safety by improving a miner’s ability to see hazards and by reducing glare. This paper considers whether LEDs can also reduce miner exposure to hazards during maintenance and operation of LED lighting.
-
5/1/2010 - Reports of InvestigationsThis NIOSH report presents the results of extensive in-mine coal dust particle size surveys of dust samples collected from intake airways in 61 U.S. coal mines, representing all 10 MSHA bituminous Coal Mine Safety and Health Districts.
-
8/1/2009 - Peer reviewed journal articlesThe purpose of this study was to perfect a method of gathering information on work positions and Visual Attention Locations needed by operators during the cutting phase and while the continuous miner trams to a new location.
-
6/1/2008 - Conference papersThe paper provides: (a) a description of the gas pressure-based design approach to blasting, (b) a simple technique for estimating the damage radius of the buffer row of holes, and (c) a discussion of smoothwall design for the contour row of holes.
-
6/1/2008 - Conference papersAn alternative method to the original system developed by NIOSH and Unimin Corp to provide for a stand-alone clothes cleaning system.