Modify Selection
- Hazard prevention and control:
- Administrative controls
- or
- Hazardous materials management
- or
- Preparedness checklists
- or
- Work design
- or
- Proper work techniques
- or
- Acclimatization
- or
- Health and safety management
- or
- Employee management
- or
- Accident and injury recording
- or
- Health and safety programs
- or
- Hearing conservation programs
- or
- Behavior safety programs
- or
- Materials storage
- or
- Policies
- or
- Standards
- or
- Inspections
- or
- Work scheduling
- or
- Work pace control
- or
- Work breaks
- or
- Task rotation
- or
- Clothes cleaning
- or
- Communications
- or
- Emergency communications
- or
- Personnel tracking
Home Links
Results 1 - 10 of 265
-
5/9/2019 - Training materialsThis tutorial provides an advanced discussion of the available CT technologies, operating characteristics and general system performance considerations with descriptions of specific uses for primary and secondary communications.
-
2/1/2012 - Technology NewsMedium frequency communications systems do not require a powered underground infrastructure to be installed for operation, and may therefore provide a higher degree of survivability after a mine disaster than other types of systems.
-
10/1/2011 - Guides and manuals, Reports of InvestigationsA comprehensive guide to establish a program to curtail diesel particulate matter emissions, control pollutants after release in an underground mine environment and reduce exposures using administrative controls.
-
12/1/2010 - Peer reviewed journal articlesNIOSH research indicates that LEDs can enhance safety by improving a miner’s ability to see hazards and by reducing glare. This paper considers whether LEDs can also reduce miner exposure to hazards during maintenance and operation of LED lighting.
-
5/1/2010 - Reports of InvestigationsThis NIOSH report presents the results of extensive in-mine coal dust particle size surveys of dust samples collected from intake airways in 61 U.S. coal mines, representing all 10 MSHA bituminous Coal Mine Safety and Health Districts.
-
1/1/2010 - Book chaptersThis paper describes how miners' safety and health training has improved since the beginning of the program in the late 1970's after the Federal Mine Safety legislation was passed, and identifies areas where further improvements are needed.
-
8/1/2009 - Peer reviewed journal articlesThe purpose of this study was to perfect a method of gathering information on work positions and Visual Attention Locations needed by operators during the cutting phase and while the continuous miner trams to a new location.
-
11/1/2008 - Conference papersThis article discusses how narrative-based training has evolved and is likely to continue changing in the future using the Underground Coal Mine Map Reading Training (UCMMRT) developed by NIOSH.
-
6/1/2008 - Conference papersThe paper provides: (a) a description of the gas pressure-based design approach to blasting, (b) a simple technique for estimating the damage radius of the buffer row of holes, and (c) a discussion of smoothwall design for the contour row of holes.
-
6/1/2008 - Conference papersAn alternative method to the original system developed by NIOSH and Unimin Corp to provide for a stand-alone clothes cleaning system.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program