Results 21 - 30 of 279

• Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 6: 5.1 System Safety Guidance
  8/1/2005 - Information Circulars, Safety guidelines, tips, and checklists
  This report is the sixth in a nine-part series of recommendations addressing the functional safety of processor-controlled mining equipment.
• An Oral History Analysis of Mine Emergency Response
  4/1/2004 - Information Circulars
  A compilation of accounts by 30 veteran mine emergency response experts. These veterans related stories and observations from events experienced during as many as 47 years of response activities. These provide an overview of lessons learned on-site.
• Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 5: 4.0 Independent Functional Safety Assessment
  5/1/2003 - Information Circulars, Safety guidelines, tips, and checklists
  This report is the fifth in a nine-part series of recommendations addressing the functional safety of processor-controlled mining equipment.
• Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 4: 3.0 Safety File
  5/1/2002 - Information Circulars, Safety guidelines, tips, and checklists
  This report is the fourth in a nine-part series of recommendations addressing the functional safety of processor-controlled mining equipment.
• Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 3: 2.2 Software Safety
  9/1/2001 - Information Circulars, Safety guidelines, tips, and checklists
  This report is the third in a nine-part series of recommendations addressing the functional safety of processor-controlled mining equipment.
• Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 2: 2.1 System Safety
  4/1/2001 - Information Circulars, Safety guidelines, tips, and checklists
  This report is the second in a nine-part series of recommendations addressing the functional safety of processor-controlled mining equipment.
• Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 1: 1.0 Introduction
  4/1/2001 - Information Circulars, Safety guidelines, tips, and checklists
  This report addresses the functional safety of processor-controlled mining equipment. It is part of a risk-based system safety process encompassing hardware, software, humans, and the operating environment for the equipment's life cycle.
• Optimizing Secondary Roof Support with the NIOSH Support Technology Optimization Program (STOP)
  8/1/2000 - Conference papers
  The 1990s saw an unprecedented increase in technologies for more effective, easier to install roof support in underground mines. To facilitate application and improve mine safety, NIOSH developed the Support Technology Optimization Program (STOP).
• Predicting System Interactions in the Design Process
  9/1/1999 - Peer reviewed journal articles
  Almost every process has a predecessor, and studying the predecessor helps to define needs and shortcomings to be addressed. This paper illustrates how such an approach was used to assess remote machine operation in underground coal mines.
• Laser Ignition of Flammable Gas
  3/1/1999 - Conference papers
  Emerging laser technologies are quickly gaining acceptance in the industrial workplace. This NIOSH research provides a scientific basis for developing safety guidelines for optical equipment in the presence of flammable methane gas and coal dust.