- Hazard prevention and control:
- Fire and explosion prevention
- or
- Permissible explosives
- or
- Ignition source elimination
- or
- Explosion proof design
- or
- Spark prevention
- or
- Nonsparking tools
- or
- Water curtains
- or
- Flameproof construction
- or
- Intrinsically safe design
- or
- Methane control
- or
- Degasification
- or
- Gob gas vent holes
- or
- Horizontal boreholes
- or
- Cross measure boreholes
- or
- Bleeder systems
- or
- Explosion suppression
- or
- Rock dusting
- or
- Rock dust barriers
- or
- Inerting atmosphere
Results 1 - 10 of 206
-
4/18/2013 - Training materials, Videos and multimediaThis is a series of 5 videos explaining how to use the coal dust explosibility meter.
-
8/15/2012 - Information CircularsThis IC details a NIOSH investigation on the CDEM’s ability to accurately predict the explosibility of coal and rock dust mixtures. The conclusions support the field use of the CDEM to measure the explosibility of coal and rock dust mixtures.
-
3/1/2012 - Peer reviewed journal articlesThe CART-based model that is given in this paper can be used to predict methane emission rates and to adjust operation parameters under ventilation constrains in longwall mining.
-
10/1/2011 - Hazards IDsIn September 2011, as part of an ongoing investigation, NIOSH determined that rock dust not conforming to the requirements in 30 CFR Part 75.2 for particle size and caking properties is being used in U.S. underground coal mines.
-
9/1/2010 - Conference papersThis paper describes the first phase of research aimed at understanding explosion pressures that can develop in coal mines and the factors that lead to high explosion pressure and possible transition to detonation.
-
6/1/2010 - Conference papersThis paper discusses factors that could result in a potential undetected dust explosion hazard, when using current dust sampling procedures, in an area that otherwise appears to be adequately protected with rock dust.
-
5/1/2010 - Reports of InvestigationsThis NIOSH report presents the results of extensive in-mine coal dust particle size surveys of dust samples collected from intake airways in 61 U.S. coal mines, representing all 10 MSHA bituminous Coal Mine Safety and Health Districts.
-
This NIOSH publication demonstrates how existing and new engineering controls can be used to reduce face methane levels.
-
2/1/2010 - Conference papersThis paper reviews the 100-year history of federal electrical safety research in the U.S mining industry, originally by the US Bureau of Mines, and as carried on today by NIOSH.
-
2/1/2010 - Conference papersThis paper will describe the progress made in mine fire safety through the history of the Bureau of Mines and NIOSH Mining program.