Modify Selection
- Hazard prevention and control:
- Ground control
- or
- Span design
- or
- Pressure arch design
- or
- Entry design
- or
- Roof beam design
- or
- Scaling
- or
- Skin control
- or
- Support design and selection
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
Home Links
Results 1 - 10 of 229
-
2/14/2022 - PC softwareUse this factor of safety calculator when designing an underground mining excavation’s ground support.
-
10/29/2018 - PC softwareSoftware for stone mine pillar design.
-
8/20/2013 - PC softwareA software program to help improve mine layouts for control of horizontal stress.
-
8/20/2013 - PC softwareA software program for designing web and barrier pillars for Highwall Mining.
-
8/20/2013 - PC softwareSoftware for designing pillars for longwall mines
-
8/20/2013 - PC softwareSoftware for designing pillars for room-and-pillar retreat mining.
-
8/20/2013 - PC softwareSoftware for estimating the relative inherent strength of coal mine roof.
-
8/20/2013 - PC softwareA software program that helps to identify the location and likely severity of multiple seam interactions
-
This document presents the results of research conducted by NIOSH in cooperation with participating underground stone mines to develop generally applicable guidelines for designing stable pillars and roof spans in stone mines.
-
1/1/2011 - Peer reviewed journal articlesStone mines in the eastern and midwestern United States use the room-and-pillar method of mining to extract relatively flat-laying sedimentary formations. A survey of pillar performance was carried out to identify potential modes of instability.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program