Results 1 - 10 of 27

• Working in the Classroom - A Vision of Miner Training in the 21st Century
  11/1/2008 - Conference papers
  This article discusses how narrative-based training has evolved and is likely to continue changing in the future using the Underground Coal Mine Map Reading Training (UCMMRT) developed by NIOSH.
• A Gas Pressure-Based Drift Round Blast Design Methodology
  6/1/2008 - Conference papers
  The paper provides: (a) a description of the gas pressure-based design approach to blasting, (b) a simple technique for estimating the damage radius of the buffer row of holes, and (c) a discussion of smoothwall design for the contour row of holes.
• Reducing Dust Exposure from Contaminated Work Clothing with a Stand-Alone Cleaning System
  6/1/2008 - Conference papers
  An alternative method to the original system developed by NIOSH and Unimin Corp to provide for a stand-alone clothes cleaning system.
• Optimizing Secondary Roof Support with the NIOSH Support Technology Optimization Program (STOP)
  8/1/2000 - Conference papers
  The 1990s saw an unprecedented increase in technologies for more effective, easier to install roof support in underground mines. To facilitate application and improve mine safety, NIOSH developed the Support Technology Optimization Program (STOP).
• A Method for Evaluating System Interactions in a Dynamic Work Environment
  1/1/1997 - Conference papers
  Discusses a methodology to evaluate the causes of mishaps to develop recommendations to enhance safety. A specific case involves implementation of remotely controlled equipment in extended cut mining.
• Assessing the Safety Culture of Underground Coal Mining: Results and Recommendations
  2/23/2014 - Conference papers
  This manuscript details the process undertaken by researchers at the National Institute for Occupational Safety and Health Office of Mine Safety and Health Research to assess the safety culture at five underground coal mines across the United States.
• An Analysis of Injuries to Haul Truck Operators in the U.S. Mining Industry
  9/1/2010 - Conference papers
  The objective of this work was to profile injuries sustained during haul truck operations, to identify priorities for further investigation, and to determine potential injury prevention strategies.
• Work Practices to Manage Bump Prone Ground
  7/1/2008 - Conference papers
  This paper will review current and historic work practices used internationally to minimize the hazard to miners from mining in conditions which could produce a bump.
• Recent Developments in Coal Mining Safety in the United States
  6/1/2007 - Conference papers
  This paper briefly describes the progress in mine safety in the United States, with emphasis on recent events that have followed since the explosion at the Sago Mine in January 2006. Legislation following the mine accidents in 2006 and areas of work car...
• Improving Silica Dust Controls for Metal/Nonmetal Mining Operations in the United States
  4/1/2007 - Conference papers
  NIOSH researchers are improving protection provided by enclosed cabs on mining equipment, reducing dust generation from surface drills, reducing dust levels in iron ore operations, and developing a new method to clean dust from soiled clothes.