Modify Selection
- Hazard prevention and control:
- Hazardous materials management
- or
- Preparedness checklists
- or
- Site security
- or
- Work design
- or
- Proper work techniques
- or
- Acclimatization
- or
- Exposure tracking
- or
- Health screening
- or
- Health and safety management
- or
- Safety incentives
- or
- Hazard recording
- or
- Health and safety programs
- or
- Hearing conservation programs
- or
- Behavior safety programs
- or
- Materials storage
- or
- Policies
- or
- Regulations
- or
- Work scheduling
- or
- Work pace control
- or
- Work breaks
- or
- Communications, location tracking, and signalling
- or
- Emergency communications
- or
- Hand signalling
- or
- Personnel tracking
Home Links
Results 1 - 10 of 214
-
6/12/2023 - PC software, Reports of InvestigationsEVADE 2.4 has been updated with expanded video and data features to make it a more generalized and powerful tool.
-
5/9/2019 - Training materialsThis tutorial provides an advanced discussion of the available CT technologies, operating characteristics and general system performance considerations with descriptions of specific uses for primary and secondary communications.
-
3/11/2014 - Reports of InvestigationsThe Report of Investigations details the results of a NIOSH investigation of purging in mobile refuge alternatives.
-
2/1/2012 - Technology NewsMedium frequency communications systems do not require a powered underground infrastructure to be installed for operation, and may therefore provide a higher degree of survivability after a mine disaster than other types of systems.
-
10/1/2011 - Guides and manuals, Reports of InvestigationsA comprehensive guide to establish a program to curtail diesel particulate matter emissions, control pollutants after release in an underground mine environment and reduce exposures using administrative controls.
-
1/1/2010 - Book chaptersThis paper describes how miners' safety and health training has improved since the beginning of the program in the late 1970's after the Federal Mine Safety legislation was passed, and identifies areas where further improvements are needed.
-
8/1/2009 - Peer reviewed journal articlesThe purpose of this study was to perfect a method of gathering information on work positions and Visual Attention Locations needed by operators during the cutting phase and while the continuous miner trams to a new location.
-
11/1/2008 - Conference papersThis article discusses how narrative-based training has evolved and is likely to continue changing in the future using the Underground Coal Mine Map Reading Training (UCMMRT) developed by NIOSH.
-
6/1/2008 - Conference papersThe paper provides: (a) a description of the gas pressure-based design approach to blasting, (b) a simple technique for estimating the damage radius of the buffer row of holes, and (c) a discussion of smoothwall design for the contour row of holes.
-
10/1/2007 - Peer reviewed journal articlesThe top five priority hazards associated with underground coal mining equipment have been identified and information about potential contributing factors and controls collated.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program