Results 1 - 10 of 24

• Working in the Classroom - A Vision of Miner Training in the 21st Century
  11/1/2008 - Conference papers
  This article discusses how narrative-based training has evolved and is likely to continue changing in the future using the Underground Coal Mine Map Reading Training (UCMMRT) developed by NIOSH.
• Reducing Dust Exposure from Contaminated Work Clothing with a Stand-Alone Cleaning System
  6/1/2008 - Conference papers
  An alternative method to the original system developed by NIOSH and Unimin Corp to provide for a stand-alone clothes cleaning system.
• Optimizing Secondary Roof Support with the NIOSH Support Technology Optimization Program (STOP)
  8/1/2000 - Conference papers
  The 1990s saw an unprecedented increase in technologies for more effective, easier to install roof support in underground mines. To facilitate application and improve mine safety, NIOSH developed the Support Technology Optimization Program (STOP).
• Laser Ignition of Flammable Gas
  3/1/1999 - Conference papers
  Emerging laser technologies are quickly gaining acceptance in the industrial workplace. This NIOSH research provides a scientific basis for developing safety guidelines for optical equipment in the presence of flammable methane gas and coal dust.
• Acoustic Assessment of Pneumatic and Electric Jackleg Drills used in the Mining Industry
  4/1/2010 - Conference papers
  This paper presents an acoustic assessment of pneumatic and electric jackleg drills involving Noise Source Identification (NSID), penetration rate measurements, operator’s cumulative noise dose measurements, and determination of sound power levels.
• Safety and Health Regulatory Changes and Technology Developments in U.S. Coal Mining
  9/1/2009 - Conference papers
  This paper discusses changes that new legislation and regulations are making to the U.S. coal mining industry, and current research that is producing technologies to make mining safer.
• Use of Infrared Sensors for Monitoring Methane in Underground Mines
  6/1/2008 - Conference papers
  This paper describes research conducted to compare the performance, including response time and accuracy, of selected instruments using infrared and catalytic sensors.
• The Brookwood Disaster and Electrical Requirements for Hazardous (Classified) Locations
  9/1/2007 - Conference papers
  Researchers with NIOSH studied the electrical equipment ignition sources for the Brookwood and other disasters to develop recommendations for preventing similar disasters.
• Recent Developments in Coal Mining Safety in the United States
  6/1/2007 - Conference papers
  This paper briefly describes the progress in mine safety in the United States, with emphasis on recent events that have followed since the explosion at the Sago Mine in January 2006. Legislation following the mine accidents in 2006 and areas of work car...
• Improving Silica Dust Controls for Metal/Nonmetal Mining Operations in the United States
  4/1/2007 - Conference papers
  NIOSH researchers are improving protection provided by enclosed cabs on mining equipment, reducing dust generation from surface drills, reducing dust levels in iron ore operations, and developing a new method to clean dust from soiled clothes.