Modify Selection
- Mining types and methods:
- Retreat mining
Home Links
Results 1 - 10 of 20
-
8/20/2013 - PC softwareSoftware for designing pillars for room-and-pillar retreat mining.
-
2/1/2010 - Unpublished documents and reportsIn the FY 2008 Appropriation (Public Law 110-161), Congress directed NIOSH to conduct "a study of the recovery of coal pillars through retreat room-and-pillar mining practices in underground coal mines at depths greater than 1,500 ft." This report inclu...
-
3/1/1997 - Information CircularsThis proceedings volume contains papers presented at technology transfer seminars sponsored by the National Institute for Occupational Safety and Health (NIOSH) on New Technology for Ground Control in Retreat Mining.
-
9/18/2020 - Contracts and cooperative agreementsWest Virginia University will calibrate the LaModel Program to aid in projecting success and accuracy of design methodologies for safe retreat mining.
-
1/1/2020 - Peer reviewed journal articlesA paper presenting a new equation for calculating accurate abutment angles for deeper mining cases. The new equation was tested using both ARMPS2010 and LaModel for the entire case history database of ARMPS2010.
-
1/16/2018 - Research projectsA project to develop engineering-based stress analysis procedures for improved assessment of stress-related hazards due to full extraction mining.
-
1/1/2018 - Peer reviewed journal articlesA paper addressing the geotechnical considerations for concurrent pillar recovery in two coal seams with 21 m of interburden under about 305 m of depth of cover.
-
1/1/2017 - Peer reviewed journal articlesA paper detailing observations made in four consecutive room and pillar retreat panels and the data collected from an instrumentation site during retreat mining.
-
10/22/2016 - News articlesA short feature story describing NIOSH products on retreat mining.
-
7/1/2009 - Conference papersThis paper documents the MHRA process and analyzes the strengths and weaknesses of the technique as it applies to pillar recovery operations.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program