- Diseases and injuries
- Equipment, tools, and parts
- Geographic regions
- Geologic conditions and events
- Hazard prevention and control
- Hazards and exposures
- Mine locations, excavations, and structures
- Mining types and methods
- Products and materials
- Research disciplines
- Research methods and measures
- Tasks and activities
- Document types
Results 21 - 30 of 53
10/1/2007 - Conference papersA paper describing tests conducted in the NIOSH Diesel Laboratory at the Lake Lynn Laboratory experimental mine, a facility developed to allow evaluation of control technologies directly in an underground environment.
9/1/2007 - Conference papersThis paper discusses methods for protecting U.S. underground coal mines from explosions of methane gas and coal dust, and presents new research, such as the Coal Dust Explosibility Meter, a handheld device to directly measure coal dust explosibility.
8/1/2007 - Conference papersThis paper describes ignition tests on pulverised coal suspensions using a suite of coals of different rank and from different countries of origin and over a range of oxygen and coal concentrations of interest for oxyfuel combustion.
A Methodology for Determining Gob Permeability Distributions and its Application to Reservoir Modeling of Coal Mine LongwallsMethane can be a significant hazard in coal mine longwalling operations and extensive methane mitigation techniques are employed by coal mine operators. Reservoir modeling techniques are used to better understand the liberation and migration of methane ...
The fact that methane ignitions continue to occur at the mining face indicates that monitoring with machine-mounted methanometers does not always indicate the presence of high methane concentrations. Methane concentrations at the face change quickly du...
This paper presents experimental results for conveyor belt flame spread from tests conducted in a small-scale tunnel. The purpose of this study is to investigate the effects of certain factors, such as belt type, on the flame spread properties.
1/1/2007 - Conference papersThis paper reviews the potential hazards from toxic fumes produced by detonating explosives in surface mining and construction operations. Techniques to protect workers and the public from the hazards of explosive-related toxic fumes are discussed.
Five mine fire experiments were conducted in a 2.08-m-high, 2.90-m-wide ventilated mine entry in NIOSH's Safety Research Coal Mine to determine the effect of the dispersion of carbon monoxide (CO) on mine fire detection.
This paper focuses on the flow patterns within the gob under three different ventilation systems: one-entry and two-entry bleederless systems, as well as a three-entry bleeder system.
Tests were conducted in a full-scale ventilation gallery to determine the influence of mining machine-mounted water sprays on airflows and methane concentrations at the face when blowing ventilation systems are used. Test results using different spray a...