- Diseases and injuries
- Equipment, tools, and parts
- Geographic regions
- Geologic conditions and events
- Hazard prevention and control
- Hazards and exposures
- Mine locations, excavations, and structures
- Mining types and methods
- Population groups
- Products and materials
- Research disciplines
- Research methods and measures
- Tasks and activities
- Document types
Results 91 - 100 of 239
Reservoir Modeling-Based Prediction and Optimization of Ventilation Requirements During Development Mining in Underground Coal Mines2/1/2008 - Conference papersThis NIOSH study presents an approach for prediction of methane inflow rates using coalbed methane reservoir modeling which can be used to limit the methane concentrations occurring as a result of the influences of various coalbed and operational parame...
11/1/2007 - Peer reviewed journal articlesA discussion the spatio-temporal volumetric strains in a consolidated Pittsburgh seam coal sample which were evaluated while both confining pressure and carbon dioxide CO2 pore pressure were evaluated.
10/1/2007 - Peer reviewed journal articlesThe primary goal of this study was to investigate the formation of combustion-generated particles derived from lubrication oil in the absence of fuel-produced soot.
10/1/2007 - Conference papersA paper describing tests conducted in the NIOSH Diesel Laboratory at the Lake Lynn Laboratory experimental mine, a facility developed to allow evaluation of control technologies directly in an underground environment.
9/1/2007 - Conference papersThis paper discusses methods for protecting U.S. underground coal mines from explosions of methane gas and coal dust, and presents new research, such as the Coal Dust Explosibility Meter, a handheld device to directly measure coal dust explosibility.
Numerical Analysis of the Influence of In-Seam Horizontal Methane Drainage Boreholes on Longwall Face Emission Rates9/1/2007 - Peer reviewed journal articlesThis study investigates different horizontal methane drainage borehole patterns, borehole lengths, and degasification times prior to and during panel extraction to evaluate their effectiveness in reducing methane emissions using a dynamic 3D reservoir m...
8/1/2007 - Conference papersThis paper describes ignition tests on pulverised coal suspensions using a suite of coals of different rank and from different countries of origin and over a range of oxygen and coal concentrations of interest for oxyfuel combustion.
Reservoir Simulation-Based Modeling for Characterizing Longwall Methane Emissions and Gob Gas Venthole Production7/1/2007 - Peer reviewed journal articlesThis paper presents the development and results of a comprehensive, "dynamic," three-dimensional reservoir model of a typical multi-panel Pittsburgh coalbed longwall mine. Results presented in this paper include a simulation of gas flow patterns from th...
A Methodology for Determining Gob Permeability Distributions and its Application to Reservoir Modeling of Coal Mine Longwalls2/1/2007 - Conference papersMethane can be a significant hazard in coal mine longwalling operations and extensive methane mitigation techniques are employed by coal mine operators. Reservoir modeling techniques are used to better understand the liberation and migration of methane ...
2/1/2007 - Conference papersThe fact that methane ignitions continue to occur at the mining face indicates that monitoring with machine-mounted methanometers does not always indicate the presence of high methane concentrations. Methane concentrations at the face change quickly du...