Modify Selection
- Products and materials:
- Gases
- or
- Nitrous oxides
- or
- Nitrogen
- or
- Carbon dioxide
- or
- Carbon monoxide
- or
- Natural gas
- or
- Propane
- or
- Aerosols
- or
- Oxygen
- or
- Sulfur hexafluoride
- or
- Nitrogen dioxide
Home Links
Results 51 - 60 of 113
-
12/1/2009 - Peer reviewed journal articlesIn this paper, the production rate-pressure behaviors of six gob gas ventholes drilled over three adjacent panels were analyzed by using conventional multi-rate drawdown analysis techniques.
-
6/1/2009 - Peer reviewed journal articlesThis paper presents data on the limiting (minimum) oxygen concentration in the presence of added N2, methane, propane, ethylene, carbon monoxide, and hydrogen and some of their binary mixtures, and addresses flammable concentration limits.
-
1/1/2009 - Peer reviewed journal articlesIn this paper, single-component gas sorption and transient diffusion processes are described within coal matrix exhibiting bimodal pore structure.
-
6/1/2008 - Conference papersThis paper summarizes the modeling efforts conducted by NIOSH in the U.S. and CSIRO in Australia to address various gas management issues encountered in longwall mines using the application of computational fluid dynamics (CFD) and numerical reservoir m...
-
6/1/2008 - Conference papersThis NIOSH study was conducted to establish the effects of a diesel particulate filter (DPF) system with sintered metal substrate on the concentrations and size distributions of nano and ultrafine aerosols and concentrations of nitric oxides in undergro...
-
11/1/2007 - Peer reviewed journal articlesA discussion the spatio-temporal volumetric strains in a consolidated Pittsburgh seam coal sample which were evaluated while both confining pressure and carbon dioxide CO2 pore pressure were evaluated.
-
11/1/2007 - Peer reviewed journal articlesThis paper concludes a five-year program on research into the use of a portable X-ray fluorescence (XRF) analyzer for analyzing lead in air sampling filters from different industrial environments, including mining, manufacturing and recycling.
-
10/1/2007 - Peer reviewed journal articlesThe primary goal of this study was to investigate the formation of combustion-generated particles derived from lubrication oil in the absence of fuel-produced soot.
-
10/1/2007 - Conference papersA paper describing tests conducted in the NIOSH Diesel Laboratory at the Lake Lynn Laboratory experimental mine, a facility developed to allow evaluation of control technologies directly in an underground environment.
-
8/1/2007 - Conference papersThis paper describes ignition tests on pulverised coal suspensions using a suite of coals of different rank and from different countries of origin and over a range of oxygen and coal concentrations of interest for oxyfuel combustion.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program