Modify Selection
- Document types:
- Peer reviewed journal articles
Home Links
Results 541 - 550 of 618
-
1/1/2003 - Peer reviewed journal articlesThis paper presents the results of testing of the Dynamic Component Program model with the ISC3 model of predicting dispersion of dust from haul trucks at two surface mine sites.
-
10/1/2002 - Peer reviewed journal articlesThis paper reports the results of a study performed to evaluate ergonomic exposures among operators of heavy construction equipment. It also provides recommendations for reducing ergonomic exposures such as vibration and postural stress.
-
6/1/2002 - Peer reviewed journal articlesExperiments were conducted to determine the optical scattering properties of diesel particulate matter (DPM) and various combustion aerosols from both flaming and smoldering combustion sources at discrete angles of 151 and 301 in the forward direction...
-
6/1/2002 - Peer reviewed journal articlesThe amount of airborne respirable dust generated from breakage of different coals varies widely. This research was conducted to identify the facets of airborne respirable dust liberation from the coal product.
-
4/1/2002 - Peer reviewed journal articlesResearchers at the NIOSH Pittsburgh Research Laboratory are developing an overhead electric power line-contact alarm for mobile equipment.
-
4/1/2002 - Peer reviewed journal articlesThis study evaluated spinal loads associated with lifting and hanging heavy mining cable in a variety of postures.
-
2/1/2002 - Peer reviewed journal articlesThis article summarized results of research conducted by the National Institute for Occupational Safety and Health (NIOSH) at its Pittsburgh Research Laboratory. The objective of this work was to determine the correlation between the mass (M) of respir...
-
2/1/2002 - Peer reviewed journal articlesThis study examines the accuracy of area sampling for measuring the dust exposure of mining machine operators at coal mine working faces. The work was prompted by the development of a prospective new type of dust sampling instrument called the machine-...
-
1/1/2002 - Peer reviewed journal articlesReports on the results of administering the Maslach Burnout Inventory assessment to 154 MSHA accident investigators.
-
1/1/2002 - Peer reviewed journal articlesFull-scale laboratory tests provide information to longwall operators that would assist them in selecting control parameters to reduce dust levels for mine-specific conditions.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program