Trichomonas vaginalis infection is the most common curable sexually transmitted infection among women in the United States; it can cause inflammation that has been associated with an increased risk of HIV transmission and acquisition, and low birth weight.
Prevalence in adult men has never been measured in a nationally representative sample. T. vaginalis infection is not reportable and so few other sources exist for obtaining national data.
Participants aged 14-59 years were tested. Public data file includes data for persons 18-59 years of age. Please see Analytic Notes for Data Users about the release of data for adolescents 14-17 years of age.
Urine specimens were processed, stored and shipped to the Division of AIDS, STD, and TB Laboratory Research, National Center for Infectious Diseases, National Centers for Disease Control and Prevention for analysis. Detailed specimen collection and processing instructions are discussed in the NHANES Laboratory Procedures Manual (LPM).
The GEN-PROBE APTIMA Trichomonas vaginalis Assay combines the technologies of target capture, Transcription-Mediated Amplification (TMA), and Dual Kinetic Assay (DKA).
Specimens are collected and transferred into their respective specimen transport tubes. The transport solutions in these tubes release the rRNA targets and protect them from degradation during storage. When the APTIMA Trichomonas vaginalis (T. vaginalis) Assay is performed in the laboratory, the target rRNA molecules are isolated from specimens by the use of capture oligomers in a method called target capture; magnetic microparticles are another key feature of target capture. The capture oligomers contain sequences complementary to specific regions of the target molecules as well as a string of deoxyadenosine residues. A separate capture oligomer is used for each target. During the hybridization step, the sequence specific regions of the capture oligomers bind to specific regions of the target molecules. The capture oligomer: target complex is then captured out of solution by decreasing the temperature of the reaction to room temperature. This temperature reduction allows hybridization to occur between the deoxyadenosine region on the capture oligomer and the poly-deoxythymidine molecules that are covalently attached to the magnetic particles. The microparticles, including the captured target molecules bound to them, are pulled to the side of the reaction vessel using magnets and the supernatant is aspirated. The particles are washed to remove residual specimen matrix that may contain amplification reaction inhibitors. After the target capture steps are completed, the specimens are ready for amplification.
Target amplification assays are based on the ability of complementary oligonucleotide primers to specifically anneal and allow enzymatic amplification of the target nucleic acid strands. The GEN-PROBE TMA reaction replicates a specific region of the small ribosomal subunit from T. vaginalis via DNA and RNA intermediates and generates RNA amplicon molecules. Detection of the rRNA amplification product sequences is achieved using nucleic acid hybridization (HPA). A single-stranded chemiluminescent DNA probe, which is complementary to a region of the target amplicon, is labeled with different acridinium ester molecule. The labeled DNA probe combines with amplicon to form stable RNA: DNA hybrids. The Selection Reagent differentiates hybridized from unhybridized probe, eliminating the generation of signal from unhybridized probe. During the detection step, light emitted from the labeled RNA: DNA hybrids is measured as photon signals in a luminometer, and are reported as Relative Light Units (RLU).
Refer to the Laboratory Method Files section for detailed laboratory procedure manual(s) of the methods used.
Trichomonas was added to NHANES 2013 2014 cycle in 2013.
Urinary Trichomonas vaginalis (December 2016)
Urine specimens were processed, stored and shipped to the Division of AIDS, STD, and TB Laboratory Research, National Center for Infectious Diseases, National Centers for Disease Control and Prevention, Atlanta GA for analysis.
Detailed instructions on specimen collection and processing are discussed in the NHANES Laboratory Procedures Manual (LPM). Vials are stored under appropriate frozen (–30°C) conditions until they are shipped to Division of AIDS, STD, and TB Laboratory Research for testing.
The NHANES quality assurance and quality control (QA/QC) protocols meet the 1988 Clinical Laboratory Improvement Amendments mandates. Detailed QA/QC instructions are discussed in the NHANES LPM.
Mobile Examination Centers (MECs)
Laboratory team performance is monitored using several techniques. NCHS and contract consultants use a structured quality assurance evaluation during unscheduled visits to evaluate both the quality of the laboratory work and the quality-control procedures. Each laboratory staff person is observed for equipment operation, specimen collection and preparation; testing procedures and constructive feedback are given to each staff. Formal retraining sessions are conducted annually to ensure that required skill levels were maintained.
Analytical Laboratories
NHANES uses several methods to monitor the quality of the analyses performed by the contract laboratories. In the MEC, these methods include performing blind split samples collected on “dry run” sessions. In addition, contract laboratories randomly perform repeat testing on 2.0% of all specimens.
Progress reports containing any problems encountered during shipping or receipt of specimens, summary statistics for each control pool, QC graphs, instrument calibration, reagents, and any special considerations are submitted to NCHS quarterly. The reports are reviewed for trends or shifts in the data. The laboratories are required to explain any identified areas of concern.
All QC procedures recommended by the manufacturers were followed. Reported results for all assays meet the Division of AIDS, STD, and TB Laboratory Research’s quality control and quality assurance performance criteria for accuracy and precision.
The data were reviewed. Incomplete data or improbable values were sent to the performing laboratory for confirmation.
Refer to the 2013 - 2014 Laboratory Data Overview for general information on NHANES laboratory data.
Demographic and Other Related Variables
The analysis of NHANES 2013 - 2014 laboratory data must be conducted using the appropriate survey design and demographic variables. The NHANES 2013 - 2014 Demographics File contains demographic data, health indicators, and other related information collected during household interviews as well as the sample weight variables. The demographics file may be linked to the laboratory data file using the unique survey participant identifier (i.e., SEQN).
Collaborators may obtain NHANES Adolescent STD Special Use Data file through a special agreement. The data set is a SAS file containing 2 variables for examined participants aged 14-17 years. Other interested researchers may use this file in the NCHS Research Data Center (RDC). The variable descriptors and variable names are as follows:
Sequence number-Seqn
Chlamydia result-URXUTRI
Detection Limits
Since this data is reported as qualitative data the use of lower LLODs isn’t applicable.
Exam weights should be used for analyses. Please refer to the NHANES Analytic Guidelines and the on-line NHANES Tutorial for further details on the use of sample weights and other analytic issues.
| Code or Value | Value Description | Count | Cumulative | Skip to Item |
|---|---|---|---|---|
| 1 | Positive | 2 | 2 | |
| 2 | Negative | 674 | 676 | |
| 3 | Indeterminate | 0 | 676 | |
| . | Missing | 32 | 708 |