papillomavirus (HPV) infection of the most common sexually transmitted
infections in the United States. Cervical infection with certain types of HPV
is a major risk factor for cervical cancer in women. The “high-risk” types of
HPV (e.g., HPV 16, 18) are associated with cervical cancer and the “low-risk”
types (e.g., HPV 6, 11) with genital warts. No national surveillance system
exists to measure the full burden of HPV infection, and no reliable national
population estimate of HPV exists. NHANES offers a unique opportunity to assess
the prevalence of HPV infection in the general population.
prevalence of HPV infection is a Developmental Healthy People 2010 objective: “Reducing
the number of new HPV cases can help minimize the overall number of cases of
high risk subtypes associated with cervical cancer in females...” Detection and
typing of HPV DNA in vaginal swabs (in conjunction with testing of NHANES sera
for HPV antibody) will allow evaluation of trends in prevalence of
type-specific HPV infection by age, sexual behavior, and race/ethnicity. Two
HPV vaccines (Gardasil and Cervarix) are licensed and recommended for use in
girls and women. Routine vaccination is recommended for girls 11 or 12 years of
age, and catch-up vaccination through 26 years. One vaccine (Gardasil) is
licensed and available for boys and men. As vaccine becomes more widely used,
the national prevalence of HPV infection will be critical for evaluating
vaccination strategies in the United States.
participants aged 14-59 years were eligible. This public data file includes
data for examined participants aged 18-59 years. Please see Analytic Notes about
the release of data for adolescents aged 14-17 years.
Description of Laboratory Methodology
Digene hc2 HPV DNA
Capture high risk result)
LBXH3RL (Hybrid Capture low risk result)
The vaginal swab
is extracted to obtain DNA. The DNA extracts are used in the Digene hc2 HPV DNA
Test. This test, using Hybrid Capture 2 technology, is a nucleic acid
hybridization microplate assay with signal amplification. It uses
chemiluminescence for the qualitative detection of eighteen types of human
papillomavirus (HPV) DNA in cervical specimens. The hc2 HPV DNA Test can
differentiate between two HPV DNA groups: low-risk HPV types (LR) 6, 11, 42,
43, 44; and high/intermediate-risk HPV types (HR)16, 18, 31, 33, 35, 39, 45,
51, 52, 56, 58, 59, 68. It cannot determine the specific HPV type present.
containing the target DNA hybridize with the HR or LR HPV RNA probe cocktail.
The resultant RNA: DNA hybrids are captured onto the surface of a microplate
well coated with antibodies specific for RNA: DNA hybrids. Immobilized hybrids
are then reacted with alkaline phosphatase conjugated antibodies specific for
the RNA: DNA hybrids, and detected with a chemiluminescent substrate. As the
substrate is cleaved by the bound alkaline phosphatase, light is emitted which
is measured as relative light units (RLUs) on a luminometer. The intensity of
the light emitted denotes the presence or absence of target DNA in the
specimen. An RLU measurement equal to or greater than the Cutoff Value
indicates the presence of HPV DNA sequences in the specimen. An RLU measurement
less than the Cutoff Value indicates the absence of the specific HPV DNA
sequences tested or HPV DNA levels below the detection limit of the assay.
Roche Linear Array
This assay uses
Roche Linear Array HPV Genotyping test that is based on HPV L1 consensus
polymerase chain reaction (PCR) with biotinylated PGMY09/11 primer sets. It
also includes biotinylated β-globin primers as an internal control for sample
amplification. The primer mix amplifies essentially all HPV types found in the
genital tract along with the human β-globin gene. After amplification the
samples are typed by hybridization to the typing strips followed by
colorimetric detection. The strip is a linear array of probes specific for 37
HPV types (6, 11, 16, 18, 26, 31, 33, 35, 39, 40, 42, 45, 51, 52, 53, 54, 55,
56, 58, 59, 61, 62, 64, 66, 67, 68, 69, 70, 71, 72, 73, 81, 82, 83, 84, IS39,
and 89) and for the positive β-globin control as well. Types are read by
comparing the reaction pattern to the typing template. Samples that are
negative for HPV and the β-globin control indicate lack of a suitable sample
and are considered inadequate for interpretation.
Laboratory Method Files
HPV Vaginal Swab Digene High Risk Laboratory Procedure Manual
HPV Vaginal Swab Linear Array Laboratory Procedure Manual
Laboratory Quality Assurance and Monitoring
samples were processed, stored and shipped to the Chronic Viral Diseases
Branch, Division of High-Consequence Pathogens and Pathology, National Center
for Emerging and Zoonotic Infectious Diseases, Centers for Disease Control and
Prevention, Atlanta, GA for analysis.
The Digene hc2 HPV
DNA Test is approved for clinical testing, but the self-collected vaginal
sample does not meet clinical guidelines. The HPV PCR tests are research tests.
The HPV laboratory followed strict research QC/QA and was CLIA certified August
2008. Detailed quality control and quality assurance instructions are discussed
in the NHANES Laboratory/Medical Technologists Procedures Manual (LPM). Read
the LABDOC file for detailed QA/QC protocols. The analytical methods are
described in the Description of the Laboratory Methodology section.
instructions on specimen collection and processing are discussed in the NHANES
Laboratory Procedures Manual (LPM). Swabs were stored at room
temperature until they were shipped to the National Center for Emerging and
Zoonotic Infectious Diseases for testing.
instructions are discussed in the NHANES LPM.
performance is monitored using several techniques. NCHS and contract
consultants use a structured competency assessment evaluation during visits to
evaluate both the quality of the laboratory work and the quality-control
procedures. Each laboratory staff member is observed for equipment operation,
specimen collection and preparation; testing procedures and constructive
feedback are given to each staff member. Formal retraining sessions are
conducted annually to ensure that required skill levels were maintained.
several methods to monitor the quality of the analyses performed by the
contract laboratories. In the MEC, these methods include performing blind split
samples collected on “dry run” sessions. In addition, contract laboratories
randomly perform repeat testing on 2% of all specimens.
containing any problems encountered during shipping or receipt of specimens,
summary statistics for each control pool, QC graphs, instrument calibration, reagents,
and any special considerations are submitted to NCHS quarterly. The reports are
reviewed for trends or shifts in the data. The laboratories are required to
explain any identified areas of concern.
Data Processing and Editing
The data were reviewed.
Incomplete data or improbable values were sent to the performing laboratory for
Refer to the 2005-2006
Laboratory Data Overview for general information on NHANES
MEC exam sample
weights should be used for analyses.
Demographic and Other
The analysis of
NHANES laboratory data must be conducted using the appropriate survey design
and demographic variables. The NHANES 2005-2006
Demographics File contains demographic data, health indicators, and
other related information collected during household interviews as well as the
sample design variables. The recommended procedure for variance estimation
requires use of stratum and PSU variables (SDMVSTRA and SDMVPSU, respectively)
in the demographic data file.
data file can be linked to the other NHANES data files using the unique survey
participant identifier (i.e., SEQN).
data files contain socio-economic data, health indicators, and other related
information collected during household interviews. Certain sensitive data on participants
under 18 years of age (e.g., HPV typing results, sexual behavior variables) are
not included in the public use files. These data may be requested as described
in the NHANES guidelines.
The public release
data file includes HPV vaginal swab data for participants aged 18-59. HPV
vaginal swab data for youth aged 14-17 years are available through the NCHS Research Data Center
Digene hc2 HPV DNA
An RLU measurement
equal to or greater than the Cutoff Value of 1.0 indicates the presence of HPV
DNA sequences in the specimen. An RLU measurement less than the Cutoff Value
indicates the absence of the specific HPV DNA sequences tested or HPV DNA levels
below the detection limit of the assay.
HPV PCR Assay
The HPV PCR
Summary variable (LBDRPCR) indicates if at least one type is positive
(LBDRPCR=1), the sample is negative (LBDRPCR=2), the sample is inadequate
(LBDRPCR=3), or the sample is missing (LBDRPCR=.).
If beta-globin is
not present, both LBDRHP and LBDRLP are negative in the sample and no HPV type
is detected, the sample is coded as “Inadequate”.
If any of the
types on the strips (LBDR06-LBDRPI) are positive, the sample is coded as
positive. If all of the types on the strip are coded as negative, and
beta-globin is detected (either LBDRHP or LBDRLP is positive) the sample is
coded as negative.
through LBDRPI are from the RUO Roche Linear Array HPV typing assay, however
LBDR52 also includes information from a type-specific assay for HPV 52. The
Linear Array typing strip includes an XR probe that hybridizes with HPV 52 as
well as HPV types 33, 35 and 58. Samples positive for the XR probe and 33, 35,
or 58 require specific testing to confirm the presence of HPV 52.
If data is qualitative, the use of lower limits of
detection (LLODs) is not applicable.
Please refer to
the NHANES Analytic
Guidelines and the on-line NHANES Tutorial for further
details on the use of sample weights and other analytic issues.