Modify Selection
- Hazard prevention and control:
- Rock dusting
Home Links
Results 1 - 10 of 35
-
4/18/2013 - Training materials, Videos and multimediaThis is a series of 5 videos explaining how to use the coal dust explosibility meter.
-
8/15/2012 - Information CircularsThis IC details a NIOSH investigation on the CDEM’s ability to accurately predict the explosibility of coal and rock dust mixtures. The conclusions support the field use of the CDEM to measure the explosibility of coal and rock dust mixtures.
-
10/1/2011 - Hazards IDsIn September 2011, as part of an ongoing investigation, NIOSH determined that rock dust not conforming to the requirements in 30 CFR Part 75.2 for particle size and caking properties is being used in U.S. underground coal mines.
-
6/1/2010 - Conference papersThis paper discusses factors that could result in a potential undetected dust explosion hazard, when using current dust sampling procedures, in an area that otherwise appears to be adequately protected with rock dust.
-
5/1/2010 - Reports of InvestigationsThis NIOSH report presents the results of extensive in-mine coal dust particle size surveys of dust samples collected from intake airways in 61 U.S. coal mines, representing all 10 MSHA bituminous Coal Mine Safety and Health Districts.
-
11/1/2009 - Conference papersNIOSH has investigated several areas in which current practices may need to be updated to adequately protect mines against coal dust propagated explosions. Other closely related issues, such as rock dust testing methods, are also discussed.
-
10/1/2008 - Peer reviewed journal articlesThis paper describes the testing and reliability of results of a NIOSH developed Coal Dust Explosibility Meter (CDEM), a hand-held instrument that uses optical reflectance to measure the explosibility of a rock dust and coal dust mixture.
-
8/1/2006 - Conference papersNIOSH and MSHA conducted a joint survey to determine the range of coal particle sizes found in dust samples collected from intake airways of U.S. coal mines.
-
4/1/2006 - Technology NewsThis publication is intended to promote awareness of float coal dust explosion hazards in the mining industry and offers a float coal dust mitigation technique.
-
1/1/1996 - Peer reviewed journal articlesThis paper reports US Bureau of Mines (USBM) research on the explosibility of coal dusts. The purpose of this work is to improve safety in mining and other industries that process or use coal.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program