|
|
|
Item No.:
27
|
|
Site:
Food Service General-Paper Towel Dispensers / Handwash Stations
|
|
Violation:
There was dust on the roller of the paper towel dispensers of handwash stations. This condition was observed in all galley, buffet, pantry, and dishwash areas.
|
|
Recommendation:
Ensure that nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
|
|
|
Item No.:
19
|
|
Site:
Buffet-Lido
|
|
Violation:
There were no serving utensils for bowls containing pancakes, bread buns, bread slices, muffins, bananas, pears, oranges, and apples. The buffet was open for service at the time of the inspection. This was corrected.
|
|
Recommendation:
Ensure that consumer self-service operations, such as salad bars and buffets, for unpackaged ready-to-eat foods are provided with suitable utensils or effective dispensing methods that protect the food from contamination; and are monitored by food employees trained in safe operating procedures.
|
|
|
Item No.:
36
|
|
Site:
Buffet-Lido Starboard & Port Beverage Stations
|
|
Violation:
The lighting was not sufficient where the food workers were serving beverages to the passengers. These areas had espresso machines, orange juice machines, utility sinks, and counters.
|
|
Recommendation:
Ensure that the light intensity is at least 220 Lux (20 foot candles) on food preparation surfaces, and at a distance of 75 centimeters (30 inches) above the deck in food preparation areas, handwashing facilities, warewashing areas, equipment, and utensil storage, pantries, toilet rooms, and consumer self-service areas.
|
|
|
Item No.:
36
|
|
Site:
Galley-Hot Station
|
|
Violation:
The lighting was not sufficient above the food preparation area.
|
|
Recommendation:
Ensure that the light intensity is at least 220 Lux (20 foot candles) on food preparation surfaces, and at a distance of 75 centimeters (30 inches) above the deck in food preparation areas, handwashing facilities, warewashing areas, equipment, and utensil storage, pantries, toilet rooms, and consumer self-service areas.
|
|
|
Item No.:
21
|
|
Site:
Pantry-Lido Coffee Station
|
|
Violation:
The drain line for the coffee machine was not sloped down and it had pooled water inside.
|
|
Recommendation:
Ensure that equipment compartments that are subject to accumulation of moisture because of conditions such as condensation, food or beverage drip, or water from melting ice are sloped to an outlet that allows complete draining.
|
|
|
Item No.:
26
|
|
Site:
Pantry-Trident
|
|
Violation:
The right side of the cuber panel of the ice machine was soiled with a dark material that appeared to be mold.
|
|
Recommendation:
Ensure that food-contact surfaces of equipment and utensils are clean to sight and touch.
|
|
|
Item No.:
30
|
|
Site:
Food Service General-Food Worker's Restrooms
|
|
Violation:
The 'WASH HANDS AFTER USING TOILET' signs at the crew restrooms for food service workers were not posted on the bulkhead adjacent to the door. For instance, the sign was posted above the handwash station in the restroom on deck 10 and outside the restroom on deck 5.
|
|
Recommendation:
Ensure that signs are conspicuously posted on the bulkhead adjacent to the door of the toilet, reading "WASH HANDS AFTER USING TOILET " in a language that the food employees understand.
|
|
|
Item No.:
22
|
|
Site:
Galley-Starboard Dishwash
|
|
Violation:
During active use of the flight-type conveyor dishwash machine, the final rinse gauge was measuring temperatures above 220°F while the temperature measured at the dish surface was 173°F. These temperature differences and the fact that no steam was coming out from the final sanitizing spray nozzles suggested that the gauge was not working properly.
|
|
Recommendation:
Ensure that warewashing equipment is maintained in good repair and proper adjustment including: (1) Being maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines; and (2) Maintaining water pressure, and water temperature measuring devices in good repair and ensuring their accuracy within the intended range of use.
|
|
|
Item No.:
23
|
|
Site:
Galley-Starboard Dishwash
|
|
Violation:
During active use of the flight-type conveyor dishwash machine, the wash temperature was measured at 146°F. The data plate affixed to the machine indicated a minimum required wash temperature of 150°F.
|
|
Recommendation:
Ensure that the temperature of the wash solution in spray type warewashers that use hot water to sanitize is not less than: (1) For a stationary-rack, single-temperature machine, 74°C (165°F); (2) For a stationary-rack, dual-temperature machine, 66°C (150°F); (3) For a single-tank, conveyor, dual-temperature machine, 71°C (160°F); or (4) For a multitank, conveyor, multitemperature machine, 66°C (150°F).
|
|
|
Item No.:
27
|
|
Site:
Galley-Starboard Coffee Station
|
|
Violation:
There was a white substance that appeared to be mold in the technical spaces behind the espresso machine.
|
|
Recommendation:
Ensure that nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
|
|
|
Item No.:
20
|
|
Site:
Galley-Starboard Coffee Station
|
|
Violation:
The bulk milk container dispensing tube was not cut on the diagonal and was cut leaving more than 2 inches protruding from the chilled dispensing head. This was corrected.
|
|
Recommendation:
Ensure that the bulk milk container dispensing tube is cut on the diagonal leaving no more than 25mm (1 inch) protruding from the chilled dispensing head.
|
|
|
Item No.:
26
|
|
Site:
Galley-Room Service / Cold Galley
|
|
Violation:
The Hobart meat slicer was soiled close to the blade. This machine was previously cleaned and not in operation at the time of the inspection.
|
|
Recommendation:
Ensure that food-contact surfaces of equipment and utensils are clean to sight and touch.
|
|
|
Item No.:
19
|
|
Site:
Galley-Dry Store #30
|
|
Violation:
Working containers of flour, bread crumbs, jasmine rice, and salt were all mislabeled with the labels of each other. This was corrected.
|
|
Recommendation:
Ensure that working containers holding food or food ingredients that are removed from their original packages for use on the vessel, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar are identified with the common name of the food.
|
|
|
Item No.:
34
|
|
Site:
Buffet-Crew Mess
|
|
Violation:
The forward handwash sink was draining very slowly.
|
|
Recommendation:
Ensure that the plumbing system in the food area is maintained in good repair.
|
|
|
Item No.:
19
|
|
Site:
Buffet-Officer's Mess
|
|
Violation:
There were no serving utensils for eight bowls with salad, cold food, and fruits. The buffet was open for service at the time of the inspection. This was corrected.
|
|
Recommendation:
Ensure that consumer self-service operations, such as salad bars and buffets, for unpackaged ready-to-eat foods are provided with suitable utensils or effective dispensing methods that protect the food from contamination; and are monitored by food employees trained in safe operating procedures.
|
|
|
Item No.:
30
|
|
Site:
Bar-Crystal Cove
|
|
Violation:
There were no paper towels at the handwash station. The bartender was preparing and serving drinks to passengers at the time of the inspection.
|
|
Recommendation:
Ensure that each handwashing facility has a supply of hand-cleansing soap or detergent and a supply of single-service paper towels available.
|
|
|
Item No.:
21
|
|
Site:
Preparation Room-Band Saw
|
|
Violation:
The manufacturer's metal label located on the inside surface adjacent to the blade was bent along the length of the tag, creating a seam that was difficult to clean.
|
|
Recommendation:
Ensure that nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
|
|
|
Item No.:
27
|
|
Site:
Preparation Room-Band Saw
|
|
Violation:
The manufacturer's metal label located on the inside surface adjacent to the blade was bent creating a seam along the length of the tag. This seam was soiled with meat remnants. In addition, the length of the seam of the removable guide/guard on the right side of the machine was soiled with food remnants. This equipment was previously cleaned and not in operation at the time of the inspection.
|
|
Recommendation:
Ensure that nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
|
|