Skip directly to site content Skip directly to page options

Inspection Detail Report

  Advanced Search |  Ship Scored 100 |  Green Sheet  |  CDC Home |  VSP Home
 
Cruise Ship: Europa Cruise Line: Hapag-Lloyd Cruises Inspection Date: 12/08/2011 Inspection Score: 98
This cruise ship inspection report lists deficiencies found during the inspection. Additional information corresponding to each item number is available in the latest edition of the VSP Environmental Public Health Standards.

View/Print Summary Report  |  View/Print Corrective Action Statement
Item No.: 21
Site: Dining Room-Coffee Station (Port Side)
Violation: A difficult to clean seam was noted between the right side of the coffee station counter and the adjacent bulkhead where sealant was missing. The sealant was repaired during the inspection.
Recommendation: Ensure nonfood-contact surfaces are free of unnecessary crevices to allow easy cleaning and to facilitate maintenance.
Item No.: 16
Site: Food Service General-Consumer Advisory
Violation: New consumer advisory statement is currently printed on the menu. Ensure the advisory is posted at the specific station where the food is served raw, undercooked, or cooked to order or on a menu specifically indicating the animal-derived foods requiring disclosure that points to a footnoted consumer advisory statement. [New requirement 2011 VSP Operations Manual] Additional statements added during inspection. A new sample dining room menu was presented at the out brief that complied with the new consumer advisory with a superscript mark that complied with the new requirement in both German and English.
Recommendation: If an animal food such as beef, eggs, fish, lamb, milk, pork, poultry, or shellfish that is raw, undercooked, or not otherwise processed to eliminate pathogens is offered in a ready-to-eat form or as a raw ingredient in another ready-to-eat food, ensure the consumer is informed by way of disclosure using menu advisories, placards, or other easily visible written means of the significantly increased risk to certain especially vulnerable consumers eating such foods in raw or undercooked form. Locate the advisory at the outlets where these types of food are served. Ensure that raw shell egg preparations are not used in uncooked products as described in section 7.3.3.2.3. Ensure that disclosure is made by one of the two following methods: (1) On a sign describing the animal-derived foods (e.g., ?oysters on the half-shell,? ?hamburgers,? ?steaks,? or ?eggs?); AND that they can be cooked to order and may be served raw or undercooked; AND a statement indicating that consuming raw or undercooked meats, seafood, shellfish, eggs, milk, poultry may increase your risk for foodborne illness, especially if you have certain medical conditions. Ensure the advisory is posted at the specific station where the food is served raw, undercooked, or cooked to order OR (2) On a menu using an asterisk at the animal-derived foods requiring disclosure and a footnote with a statement indicating that consuming raw or undercooked meats, seafood, shellfish, eggs, milk, or poultry may increase your risk for foodborne illness, especially if you have certain medical conditions.
Item No.: 16
Site: Galley-Time Control Plan
Violation: Yogurt containers on the ship's time control plan were stored in an area not included on the ship's time control plan. [New requirement 2011 VSP Operations Manual]
Recommendation: Maintain a written time control plan(s) that ensures compliance with these guidelines on the vessel and make it available for review during inspections. Post a time control plan at each outlet where time control is used. Ensure plan(s): (2) List refrigeration and hot holding units (compartments and cabinets) on time control (the physical units must also be labeled as such).
Item No.: 22
Site: Galley-Pot Washing Area
Violation: Soiled pots and pans were stacked directly on the deck in the vicinity of the soiled utensil rack. Additional deck stands had been added for soiled pots in pans which diminished the proper separation between the soiled sections and the clean sections of the pot wash area.
Recommendation: Ensure drainboards, utensils, racks, or tables large enough to accommodate all soiled and cleaned items that may accumulate during hours of operation are provided for necessary utensil holding before cleaning and after sanitizing.
Item No.: 22
Site: Galley-Dishwashing Area
Violation: Dishwashing machine had a final rinse spray nozzle turned 90° from its proper perpendicular position to conveyor path which reduced the dishes exposure to the final sanitizing rinse. Repairs to this dishwasher were completed before the end of the inspection.
Recommendation: Maintain warewashing equipment in good repair and proper adjustment, including: (1) warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines.
Item No.: 20
Site: Galley-Pantry
Violation: Ice machine had a black material in the top of the ice storage bin near the ice maker chute. Cleaning of the bin was started while the inspection team was still in the area. The cleaning of the area showed that the black material was a deteriorating rubber gasket around the ice chute.
Recommendation: Food contact equipment must be maintained in good repair and proper adjustment: (1) Equipment must be maintained in a state of repair and condition that meets the materials, design, construction, and operating specifications of these guidelines.
Item No.: 19
Site: Provisions-Refrigerated Store Room
Violation: Pallets where food was stored were being used for walking surfaces from door to back of the Cheese / Sausage walk-in cooler.
Recommendation: Protect food from contamination by storing the food: (1) Covered or otherwise protected; (2) In a clean, dry location; (3) Where it is not exposed to splash, dust, or other contamination; and (4) At least 15 centimeters (6 inches) above the deck.
Item No.: 08
Site: Potable Water-Backflow Prevention Records
Violation: The dialysis units were not included in the ship's backflow prevention device inventory. Ensure the unit's installed backflow prevention devices are acceptable for protecting the ship's potable water system.
Recommendation: Provide a comprehensive cross-connection control program. Protect the following connections to the potable water system against backflow with air gaps or mechanical backflow prevention devices at: (28) any other connection to the potable water system where contamination or backflow can occur.
Item No.: 06
Site: Potable Water-Microbiological Testing Methods
Violation: The staff did not have the color comparator required by the manufacturer's instructions for the microbiological testing procedures used by the ship. [New requirement 2011 VSP Operations Manual]
Recommendation: Operate and maintain test kits, incubators, and associated equipment in accordance with the manufacturers? specifications.
Item No.: 07
Site: Potable Water-Potable Water Tank Disinfection
Violation: The ship's potable water tank disinfection methods and records were acceptable. During the recent dry dock (09 Nov 2011), the contract potable water tank disinfection was done using a hydrogen peroxide sanitizer at an unknown strength or equivalence to the VSP chlorine disinfection procedures. The alternative disinfection procedure was not submitted to or accepted by VSP prior to its use.
Recommendation: Clean, disinfect, and flush potable water tanks and all affected parts of the potable water distribution system with potable water: (1) before being placed in service; (2) before returning to operation after repair, replacement; or (3) after being subjected to any contamination, including entry into a potable water tank.
Item No.: 20
Site: Bar-Pantry
Violation: A small cutting board for drink garnishes was severely scored and difficult to clean.
Recommendation: Ensure surfaces such as cutting blocks and boards that are subject to scratching and scoring are resurfaced if they no longer can be effectively cleaned and sanitized, or discarded if they are not capable of being resurfaced.
Item No.: 20
Site: Galley-Soup Station
Violation: Three grease fryers at the soup station had approximately six slotted fasteners each that were located above the frying arm in the splash zone. Some of these fasteners appeared to be soiled with grease residue.
Recommendation: Use only low profile, nonslotted, noncorroding, and easy-to-clean fasteners on food-contact surfaces and in splash zones. Prohibit the use of exposed slotted screws, Phillips head screws, or pop rivets in these areas.
Item No.: 21
Site: Galley-Pantry/Dishwash Room
Violation: An exposed seam existed between where the prep table and bulkhead meet at the prep counter furthest from the dishwash. The sealant used along this juncture was worn or missing making cleaning difficult. Repairs to the seam were made during the inspection.
Recommendation: Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Ensure equipment that is fixed because it is not easily movable is installed so that it is: (1) Spaced to allow access for cleaning along the sides, behind, under and above the equipment; (2) Spaced from adjoining equipment, bulkhead, and deckhead at a distance of not more than 0.8 millimeter or 1/32 inch; or (3) Sealed to adjoining equipment or bulkhead.
Item No.: 21
Site: Buffet-Beverage Station
Violation: Electrical cords attached to the juice machine were observed laying directly on the counter making cleaning difficult.
Recommendation: Ensure nonfood-contact surfaces are designed and constructed to allow easy cleaning and to facilitate maintenance.
Item No.: 10
Site: Recreational Water Facilities-Turnover Rates
Violation: Turnover rates for the whirlpool and swimming pool were not available. (New requirement 2011 VSP Manual)
Recommendation: For RWFs with skim gutters, ensure that the fill level of the RWF is to the level of the skim gutters. Design recirculation systems and equipment, including chemical control equipment, UV disinfection systems, filter, and pumps to maintain adequate water chemistry control while operating at the following minimum turnover rates: (1) swimming pool (VSP 2005 Construction Guidelines or earlier): 6 hours; (2) swimming pool (VSP 2011 Construction Guidelines or later): 4 hours; (3) children's pool: 0.5 hours; (4) wading pool: 1 hour; (5) whirlpool spa: 0.5 hours; (6) spa pool: 2 hours; (7) interactive RWF or activity pool less than 610 millimeters (24 inches) deep: 1 hour; (8) interactive RWF or activity pool greater than 610 millimeters (24 inches) deep: 2 hours; and (9) baby-only water facility: 0.5 hours. Ensure an RWF slide that is combined with a pool has a turnover rate that matches the rate for the pool.
Item No.: 10
Site: Recreational Water Facilities-Whirlpool Shock Chlorination
Violation: The free chlorine residual value was not being recorded before and after the shock treatment. (New requirement 2011 VSP Manual)
Recommendation: Increase the free residual halogen to at least 10.0 mg/L (ppm) and circulate for at least 1 hour every 24 hours. Test the free residual halogen both at the start and completion of shock halogenation. Superhalogenate the water in the entire RWF system to 10 ppm to include the whirlpool spa/spa pool tub, compensation tank, filter housing, and all associated piping before starting the 1-hour timing.
Item No.: 10
Site: Recreational Water Facilities-Antientrapment Drains
Violation: No documentation was available to show the two gravity drain covers in the swimming pool were compliant with ASME A112.19.8, nor was an audible alarm installed. (New requirements 2011 VSP Manual)
Recommendation: For RWFs with gravity drainage and multiple drains (2 or more drains greater than 3 feet apart), provide either a standard design (not compliant with ASME A112.19.8) drain cover and an alarm, or an ASME A112.19.8 compliant antientrapment/antientanglement drain cover. Ensure the alarm is audible and sounds in both a continuously manned space and at the RWF. Ensure this alarm is for all draining: accidental, routine, and emergency. For RWFs with gravity drainage and a single blockable drain or multiple drains less than 3 feet apart, provide an ASME A112.19.8 compliant antientrapment/antientanglement drain cover and a gravity drainage system. For RWFs with suction fittings and multiple drains (2 or more drains per pump with drains greater than 3 feet apart), provide an ASME A112.19.8 compliant antientrapment/antientanglement drain cover. For RWFs with suction fittings and a single unblockable drain (per ASME A112.19.8-2007), provide an ASME A112.19.8 compliant antientrapment/antientanglement drain cover and a safety vacuum release system or automatic pump shut-off system. Ensure the testing of manufactured drain covers is by a nationally or internationally recognized testing laboratory. Ensure the following information is stamped on each manufactured antientrapment drain cover: (1) certification standard and year; (2) type of drain use (single or multiple); (3) maximum flow rate (in gallons or liters per minute); (4) type of fitting (suction outlet); (5) life expectancy of cover; (6) mounting orientation (wall, floor, or both); (7) manufacturer?s name or trademark; and (8) model designation. Ensure the design of custom/shipyard constructed (field fabricated) drain covers and suction fittings is fully specified by a registered design professional in accordance with ASME A112.19.8-2007. Ensure the specifications fully address cover/grate loadings, durability, hair, finger and limb entrapment issues, cover/grate secondary layer of protection, related sump design, and features specific to the RWF. Provide a letter from the shipyard for each custom/shipyard constructed (field fabricated) drain cover fitting. At a minimum, ensure the letter specifies the shipyard, name of the vessel, specifications and dimensions of the drain cover, as well as the exact location of the RWF for which it was designed. Ensure the name of and contact information for the registered design professional and signature are on the letter.
Item No.: 10
Site: Recreational Water Facilities-Depth Markers
Violation: The depth markers for the pool were only in meters, feet must also be included. (New requirement 2011 VSP Manual)
Recommendation: Prominently display the depth of each RWF that is deeper than 1 meter (3 feet) so that it can be seen from the deck and in the pool. Label depth markers in both feet and meters. Additionally, install depth markers for every 1 meter (3 feet) change in depth.
Item No.: 10
Site: Recreational Water Facilities-Halogen and pH Analyzer Probe Locations
Violation: The sample line locations for free halogen residual and pH probes for the swimming pool and whirlpool were located after the compensation tank. (New requirement 2011 VSP Manual)
Recommendation: Ensure the sample line for the analyzer probe (monitoring) is either directly from the RWF or on the return line from each RWF and before the compensation tank.
Item No.: 10
Site: Recreational Water Facilities-Signage
Violation: The whirlpool signage did not meet the new requirements of the 2011 VSP Operations Manual. (New requirement 2011 VSP Manual)
Recommendation: In addition to the safety sign requirements in section 6.7.1.1.1, install a sign at each whirlpool spa and spa pool entrance listing precautions and risks associated with the use of these facilities. Include, at a minimum, cautions against use by the following: (1) individuals who are immunocompromised; (2) individuals on medication or who have underlying medical conditions such as cardiovascular disease, diabetes, or high or low blood pressure; and (3) pregnant women, elderly persons, and children. Additionally, caution against exceeding 15 minutes of exposure.
Item No.: 10
Site: Recreational Water Facilities-Test Kit
Violation: The ship's test kit being used for residual halogen monitoring was unable to test for pH and total alkalinity. (New requirement 2011 VSP Manual)
Recommendation: Ensure a test kit is available for testing water quality parameters, including free and total halogen levels (chlorine and bromine, where applicable), pH, and total alkalinity. Ensure that test kits are accurate to within 0.2 mg/L (ppm) for halogen and have a testing range of free residual halogen normally maintained in the RWF. Ensure test kits for pH are accurate to within 0.2. Ensure all reagents are not past their expiration dates. Monitor and adjust the RWF?s flow rates, free and combined halogen levels, pH, total alkalinity, and clarity as recommended by the manufacturer and to maintain optimum public health protection and water chemistry.
Item No.: 10
Site: Recreational Water Facilities-Fecal and Vomit Accident Plan
Violation: The ship's fecal and vomit accident plan did not have the current free halogen residual contact time for loose stool. (New requirement 2011 VSP Manual)
Recommendation: Ensure a fecal and vomit accident response procedure that meets or exceeds the procedure provided in Annex 13.8 is available for review during inspections.
*Inspections scores of 85 or lower are NOT satisfactory
Vessel Sanitation Program