Skip directly to site content Skip directly to page options

Inspection Detail Report

  Advanced Search |  Ship Scored 100 |  Green Sheet  |  CDC Home |  VSP Home
 
Cruise Ship: Stad Amsterdam Cruise Line: Rederij Clipper Stad Amsterdam Inspection Date: 04/17/2012 Inspection Score: 90
This cruise ship inspection report lists deficiencies found during the inspection. Additional information corresponding to each item number is available in the latest edition of the VSP Environmental Public Health Standards.

View/Print Summary Report  |  View/Print Corrective Action Statement
Item No.: *
Site: Housekeeping-Outbreak Prevention and Response Plan (OPRP)
Violation: Throughout the Health Procedures Manual and all the sections under OPRP there was no specfic mention or instructions written regarding procedures to follow, protective clothing, or chemicals used in response to vomiting and diarrheal incidents which may occur both in public areas and cabins. VSP strongly recommends such a set of procedures be developed for this ship, as such incidents many times create conditions which transmit pathogens easily to many people who are present when these occur.
Recommendation:
Item No.: 02
Site: Medical-Crew Illness Assessment
Violation: Although staff stated that arriving crewmembers are individually interviewed about any gastrointestinal (GI) illness symptoms experienced up to 3 days prior to boarding the ship, no records are made of this questioning and nothing is retained onboard.
Recommendation: Ensure the reportable cases include crew members with a symptom onset time of up to 3 days before boarding the vessel. Maintain documentation of the 3-day assessment for each crew member with symptoms on the vessel for review during inspections and retain this documentation for 12 months.
Item No.: 07
Site: Potable Water-Potable Water Tanks
Violation: All four of the potable water storage tanks onboard share walls and bottom with the ship's hull. There is no variance applied for or in-place with VSP regarding these tanks and no salinometer installed to measure for seawater intrusion into any of these tanks.
Recommendation: Ensure potable water tanks do not share a common wall with the hull of the vessel or with tanks or piping containing nonpotable water or other liquids.
Item No.: 08
Site: Potable Water-International Shore Connection
Violation: There was no backflow prevention device installed for the international connection for fire. This was a violation noted on the April 2011 inspection.
Recommendation: Provide a comprehensive cross-connection control program. Protect the following connections to the potable water system against backflow with air gaps or mechanical backflow prevention devices: (1) RWFs; (2) decorative water features/fountains; (3) cabin shower hoses, toilets, whirlpool tubs, and similar facilities; (4) photographic laboratory developing machines and utility sinks; (5) beauty and barber shop spray-rinse hoses; (6) spa steam generators where essential oils can be added; (7) hose-bib connections; (8) garbage grinders and food waste systems; (9) automatic galley hood washing systems; (10) food service equipment; (11) mechanical warewashing machines; (12) detergent dispensers; (13) hospital and laundry equipment; (14) air conditioning expansion tanks; (15) boiler feed water tanks; (16) fire system; (17) public toilets, urinals, and shower hoses; (18) potable water, bilge, and pumps that require priming; (19) freshwater or saltwater ballast systems; (20) international fire and fire sprinkler water connections (install a reduced pressure assembly); (21) the potable water supply to automatic window washing systems that can be used with chemicals or chemical mix tanks; (22) water softeners for nonpotable fresh water; (23) water softener and mineralizer drain lines, including backwash drain lines (install an air gap or a reduced pressure assembly); (24) high saline discharge line from evaporators (install an air gap or a reduced pressure assembly); (25) chemical tanks; (26) other connections between the potable water system and a nonpotable water system, such as the gray water system, laundry system, or technical water system (install an air gap or a reduced pressure assembly); (27) black water or combined gray water/black water systems (install an air gap); (28) any other connection to the potable water system where contamination or backflow can occur.
Item No.: 08
Site: Potable Water-Laundry
Violation: The two laundry washing machines had non-continuous pressure model backflow preventers installed on the potable water connection hoses, between two valves.
Recommendation: Replace these backflow preventers with continuous pressure models which can be connected directly to the potabe water supply lines.
Item No.: 08
Site: Potable Water-Bunker Hose
Violation: A green garden hose was stored in the potable water bunkering locker and is used, according to staff, in ports where the larger potable water bunker hoses do not fit.
Recommendation: Construct all hoses, fittings, and water filters used in the bunkering of potable water of safe, easily cleanable materials approved for potable water use and maintain them in good repair.
Item No.: 08
Site: Potable Water-Bunkering, Production, and Distribution
Violation: Staff do not test the pH when initially producing potable water thru the reverse osmosis system onboard. Additionally, staff stated that calibration comparison tests for chlorine are made twice daily during production or bunkering and for the distribution chlorination analyzer data loggers, but no record of the calibration testing was made.
Recommendation: After the free residual halogen level of at least 2.0 mg/L (ppm) and pH level not exceeding 7.8 have been reached, monitor the free residual halogen and pH at least hourly during the bunkering of potable water. After the free residual halogen level of at least 2.0 mg/L (ppm) and pH level not exceeding 7.8 have been reached, monitor the free residual halogen and pH at least once every 4 hours during the production of potable water. Maintain accurate records of production and bunkering monitoring aboard for 12 months and ensure these records are available for review during inspections.
Item No.: 08
Site: Potable Water-Production
Violation: The piping from the reverse osmosis plant downstream to the chlorine injection point was striped blue, indicating that this section of permeate water is potable.
Recommendation: Stripe or paint distillate and permeate lines directed to the potable water system in accordance with ISO 14726 (blue/gray/blue). Ensure no other lines have the above color designations. Stripe or paint these lines at 5 meters (15 feet) intervals and on each side of partitions, decks, and bulkheads, except where decor would be marred by such markings, including potable water supply lines in technical lockers. Do not stripe or paint potable water lines after reduced pressure assemblies as potable water. Uniquely identify all refrigerant brine lines in all galleys, pantries, and cold rooms to prevent cross-connections.
Item No.: 08
Site: Potable Water-Potable Water Tanks
Violation: In October 2011 all four potable water tanks were cleaned and disinfected with re-coating applied. The record indicated that the manufacture representative for the coating Hempadur 85671 was present and observed the work completed. The written letter from that representative commented only on the application of the coating. There was no comment from this representative or from the ship staff who did the work on the drying or curing process. Additionally, the cleaning, disinfection, flushing, and refilling process was not documented, so it was unclear what chlorine concentration and time was used and what the level of chlorine in each tank was when refilled. The disinfection documentation violation was also noted in the April 2011 inspection report.
Recommendation: Ensure the interior coatings on potable water tanks are approved for potable water contact by a certification organization. Follow all manufacturers? recommendations for application, drying, and curing. For the tank coatings used, maintain the following onboard: (1) written documentation of approval from the certification organization (independent of the coating manufacturer); (2) manufacturers? recommendations for application, drying, and curing; and (3) written documentation that the manufacturers? recommendations have been followed for application, drying, and curing.
Item No.: 08
Site: Potable Water-Potable Water Tanks
Violation: The written approval for potable water application for the Hempadur 85671 potable water tank coating thru WRAS in the UK expired in February 2011, and there was no letter of approval from the Norwegian: Folkehelseinstituttet, named in the Hempel documents.
Recommendation: Ensure the interior coatings on potable water tanks are approved for potable water contact by a certification organization.
Item No.: 15
Site: Provisions-Dry Store
Violation: A can of chestnut puree, a can of sauerkraut, a can of olives, and a can of tuna were dented and stored along with products in good condition. The cans were immediately taken out of storage to be discarded.
Recommendation: Ensure food packages are in good condition and protect the integrity of the contents so that the food is not exposed to adulteration or potential contaminants. Ensure canned goods with dents on end or side seams are not used.
Item No.: 16
Site: Galley-Walk-In Refrigerator
Violation: One bowl of cooked chicken pieces had only the preparation date written on the plastic covering and no discard date.
Recommendation: Ensure refrigerated, ready-to-eat, potentially hazardous food: (1) Prepared on a vessel and held refrigerated for more than 24 hours is clearly marked at the time of preparation to indicate the date or day by which the food must be consumed (7 calendar days or fewer from the day the food is prepared). The day of preparation is counted as day 1. (2) Prepared and packaged by a food-processing plant and held on the vessel after opening for more than 24 hours must be clearly marked at the time the original container is opened to indicate the date by which the food must be consumed (7 calendar days or fewer after the original container is opened). The day of opening is counted as day 1.
Item No.: 16
Site: Galley-Cold Area
Violation: A large hotel pan with cut melon had a temperature of 55°F. The undercounter refrigerator where this potentially hazardous food was stored had an ambient temperature of 40°F. The food had a preparation date of 17 April and a discard date of 18 April.
Recommendation: Except during preparation, cooking, or cooling, or when time is used as the public health control, maintain potentially hazardous foods at 57°C (135°F) or above, except that roasts may be held at a temperature of 54°C (130°F); or 5°C (41°F) or less.
Item No.: 16
Site: Food Service General-Time Control Plans
Violation: The staff explained that they use time control at the crew mess, Long Room buffet, and at the milk refrigerator of the coffee machine of the inside bar. However, the ship has no time control plans.
Recommendation: If time only?rather than time in conjunction with temperature?is used as the public health control for a working supply of potentially hazardous food before cooking, or for ready-to-eat potentially hazardous food that is displayed or held for service for immediate consumption, ensure the food (1) Has an initial temperature of 5°C (41°F) or less or 57°C (135°F) or greater before placement on time control. (2) Is not be placed on temperature control again. (3) Is marked or otherwise identified to indicate the time 4 hours past the point in time when the food is removed from temperature control (if the time between service set-up and closing is greater than 4 hours. and (4) Is discarded within 4 hours of placement on time control. Maintain a written time control plan(s) that ensures compliance with these guidelines on the vessel and make it available for review during inspections. Post a time control plan at each outlet where time control is used. Ensure plan(s): (1) Includes set-up and discard times for each outlet. (2) List refrigeration and hot holding units (compartments and cabinets) on time control (the physical units must also be labeled as such). (3) Describe or show the flow of potentially hazardous food from when last in temperature control to placement in time control and discard.
Item No.: 17
Site: Galley-Hot Area
Violation: A large pan of cooked rice and a large pan of bolognaise sauce with preparation dates of 14 April were not listed on the cooling logs.
Recommendation: Ensure logs documenting cooked potentially hazardous food cooling temperatures and times from the starting points designated in 7.3.5.2.1 thru the control points at 2 and 6 hours are maintained onboard the vessel for a period of 30 days form the date the food was placed in the cooling process. Ensure logs documenting cooling of potentially hazardous foods prepared from ingredients at ambient temperatures, with the start time to the time when 5°C (41 °F) is reached are also maintained for a period of 30 days, beginning with the day of preparation.
Item No.: 17
Site: Galley-Cold Area
Violation: A large pan of cut melon with preparation date of 17 April was not listed on the cooling logs.
Recommendation: Ensure logs documenting cooked potentially hazardous food cooling temperatures and times from the starting points designated in 7.3.5.2.1 thru the control points at 2 and 6 hours are maintained onboard the vessel for a period of 30 days form the date the food was placed in the cooling process. Ensure logs documenting cooling of potentially hazardous foods prepared from ingredients at ambient temperatures, with the start time to the time when 5°C (41 °F) is reached are also maintained for a period of 30 days, beginning with the day of preparation.
Item No.: 19
Site: Galley-Walk-In Refrigerator
Violation: A crate with pears was stored directly under a refrigeration pipe. There was condensation around the pipe. The pears did not appear to be impacted and were moved away of the refrigeration pipe.
Recommendation: Protect food from contamination by storing the food: (1) Covered or otherwise protected; (2) In a clean, dry location; (3) Where it is not exposed to splash, dust, or other contamination; and (4) At least 15 centimeters (6 inches) above the deck.
Item No.: 19
Site: Galley-Defrosting Area
Violation: Crates with fruits were stored directly under a refrigeration pipe. There was condensation around the pipe and dripping just next to the creates. The fruits did not appear to be impacted and were moved away of the refrigeration pipe.
Recommendation: Protect food from contamination by storing the food: (1) Covered or otherwise protected; (2) In a clean, dry location; (3) Where it is not exposed to splash, dust, or other contamination; and (4) At least 15 centimeters (6 inches) above the deck.
Item No.: 19
Site: Provisions-Dry Store
Violation: A drain line carrying liquid waste from the sink in the port side toilet room passed directly over food storage.
Recommendation: Ensure drain lines carrying sewage or other liquid waste do not pass directly overhead or horizontally through spaces used for the preparation, serving, or storage of food, or the washing or storage of utensils and equipment. Ensure that drain lines that are unavoidable in these food areas are sleeve-welded and do not have mechanical couplings.
Item No.: 19
Site: Buffet-
Violation: A large pan of apples with stick on labels was out for service. The staff explained that is up to the crew member to wash the apple after it is taken from the buffet line.
Recommendation: Thoroughly rinse raw fruits and vegetables in water to remove soil and other contaminants before being cut, combined with other ingredients, cooked, served, or offered for human consumption in ready-to-eat form.
Item No.: 20
Site: Galley-Hot Area
Violation: All six cutting blocks were scratched and scored, making them difficult to clean.
Recommendation: Ensure surfaces such as cutting blocks and boards that are subject to scratching and scoring are resurfaced if they no longer can be effectively cleaned and sanitized, or discarded if they are not capable of being resurfaced.
Item No.: 20
Site: Galley-Cold Area
Violation: Previously cleaned chopper blades had several places with corrosion, making them difficult to clean.
Recommendation: Materials used in the construction of multiuse utensils and food contact surfaces of equipment must be: (1) durable, corrosion resistant, and nonabsorbent; (2) sufficient in weight and thickness to withstand repeated warewashing; (3) finished to have a smooth, easily cleanable surface; and (4) resistant to pitting, chipping, crazing, scratching, scoring, distortion and decomposition.
Item No.: 21
Site: Galley-Cold Area
Violation: There was corrosion on undercounter refrigerator door hinges, making them difficult to clean.
Recommendation: Design and construct nonfood-contact surfaces of equipment and utensils to be durable and to retain their characteristic qualities under normal use conditions.
Item No.: 21
Site: Galley-Cold Area
Violation: In the knife locker, there was a knife with a raw wood handle that was not easy to clean.
Recommendation: Repair or replace the knife handle.
Item No.: 21
Site: Food Service General-Food Storage, Preparation and Service, and Bars
Violation: Varnished wooden shelves with difficult to clean joints and seams and exposed raw wood were used to store packages of food and beverages.
Recommendation: Seal or varnish raw wood so it is non-absorbemt. Seal seams and profile gaps so cleaning of this areas is easy.
Item No.: 21
Site: Galley-Cold and Hot Areas
Violation: The technical compartments of bench 1, bench 2, and blast chiller table had corroded panels, making them difficult to clean.
Recommendation: Ensure nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that require frequent cleaning are constructed of a corrosion-resistant, nonabsorbent, and smooth material.
Item No.: 21
Site: Buffet-
Violation: There was a broken fabric speaker cover over out for service apples and clean cups. The fabric was not easy to clean.
Recommendation: Remove such items from positions where they can contaminate food and clean equipment. Keep such items in good repair wherever they are placed.
Item No.: 21
Site: Buffet-
Violation: The counter-mounted coffee machine was fixed to the bulkhead and had a clearance from the counter of less than 1 inch, making the counter under the machine difficult to clean.
Recommendation: Ensure table-mounted equipment that is not easily movable is elevated on legs that provide at least a 100 mm (4-inch) clearance between the table and the equipment.
Item No.: 21
Site: Pantry-Long Room
Violation: The ice scoop handle had two stick on labels, making it difficult to clean.
Recommendation: Remove labels when the ice scoop is cleaned.
Item No.: 21
Site: Pantry-Long Room
Violation: The upper technical compartment of the ice machine was heavily corroded in many areas.
Recommendation: Ensure nonfood contact equipment is maintained in good repair and proper adjustment including: (1) Equipment maintained in a state of repair and condition that meets the materials, design, construction, and operation specifications of these guidelines; (2) Equipment components such as doors, seals, hinges, fasteners, and kick plates are kept intact, tight, and adjusted in accordance with manufacturer's specifications.
Item No.: 26
Site: Pantry-Long Room
Violation: The upper compartment of the ice machine was soiled at the hanging lever with brown residues that appeared to be mold.
Recommendation: Ensure food only contacts surfaces of equipment and utensils that are cleaned and sanitized. Ensure food contact surfaces of equipment and utensils are clean to sight and touch.
Item No.: 26
Site: Buffet-
Violation: One previously cleaned bowl and three previously cleaned plates were soiled with food residue.
Recommendation: Ensure food only contacts surfaces of equipment and utensils that are cleaned and sanitized. Ensure food contact surfaces of equipment and utensils are clean to sight and touch.
Item No.: 26
Site: Galley-Cold Area
Violation: At least five previously clean trays were soiled with food residue.
Recommendation: Ensure food contact surfaces of equipment and utensils are clean to sight and touch. Ensure food only contacts surfaces of equipment and utensils that are cleaned and sanitized.
Item No.: 26
Site: Galley-Cold Area
Violation: The meat slicer was soiled close to the blade with old food residue. This machine was previously cleaned and not in operation at the time of the inspection.
Recommendation: Ensure food only contacts surfaces of equipment and utensils that are cleaned and sanitized. Ensure food contact surfaces of equipment and utensils are clean to sight and touch.
Item No.: 26
Site: Galley-Cold Area
Violation: Previously cleaned chopper blades were soiled with food residue.
Recommendation: Ensure food only contacts surfaces of equipment and utensils that are cleaned and sanitized. Ensure food contact surfaces of equipment and utensils are clean to sight and touch.
Item No.: 27
Site: Galley-Cold Area
Violation: The meat slicer was soiled below the sliding arm with old food residue. This machine was previously cleaned and not in operation at the time of the inspection.
Recommendation: Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item No.: 27
Site: Galley-Cold Area
Violation: The undercounter refrigerator door hinges were soiled with food residue. This area was previously cleaned and not in operation at the time of the inspection.
Recommendation: Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item No.: 27
Site: Galley-Cold and Hot Areas
Violation: The technical compartments of bench 1, bench 2, and blast chiller table were soiled with dust, corrosion debris, and food residue.
Recommendation: Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item No.: 27
Site: Galley-Hot Area
Violation: There was grease residue under the top front panel of the flat grill and under the doors of the cabinet under the flat grill. This area was previously cleaned and not in operation at the time of the inspection.
Recommendation: Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item No.: 27
Site: Buffet-
Violation: The counter under the fixed counter-mounted coffee machine was soiled with food residue. This area was previously cleaned and not in operation at the time of the inspection.
Recommendation: Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item No.: 27
Site: Pantry-Long Room
Violation: The upper technical compartment of the ice machine was soiled with rust debris.
Recommendation: Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item No.: 28
Site: Galley-Hot Area
Violation: Previously cleaned utensils were stored in a cabinet that was soiled with food residues.
Recommendation: Store cleaned equipment and utensils, laundered linens, and single-service and single-use articles: (1) in a clean, dry location; (2) in a location where they are not exposed to splash, dust, or other contamination; (3) at least 150 millimeters (6 inches) above the deck.
Item No.: 28
Site: Galley-Cold Area
Violation: Previously cleaned glassware was stored in a cabinet that was soiled with food residues.
Recommendation: Store cleaned equipment and utensils, laundered linens, and single-service and single-use articles: (1) in a clean, dry location; (2) in a location where they are not exposed to splash, dust, or other contamination; (3) at least 150 millimeters (6 inches) above the deck.
Item No.: 28
Site: Galley-Dishwash
Violation: During active dishwashing, the crew members were drying with cloths the utensils just taken out of the dishwasher.
Recommendation: After cleaning and sanitizing, ensure equipment and utensils are air dried or adequately drained before contact with food.
Item No.: 29
Site: Pantry-Long Room
Violation: The staff explained that the sink in this area is for utility and handwashing uses.
Recommendation: Ensure handwashing facilities are used for no other purpose and are accessible at all times. Install food preparation or utility sinks if needed in this pantry, but under no circumstances should the handwash sink be used for utility purposes.
Item No.: 29
Site: Bar-Outside Bar
Violation: The staff explained that the sink in this area is for utility and handwashing uses.
Recommendation: Ensure handwashing facilities are used for no other purpose and are accessible at all times. Install food preparation or utility sinks if needed in this pantry, but under no circumstances should the handwash sink be used for utility purposes.
Item No.: 30
Site: Buffet-
Violation: The handwashing station in the food worker side of the hot buffet line did not have a waste receptacle.
Recommendation: Ensure a handwashing facility includes a sink, soap dispenser, single-use towels dispenser, and waste receptacle.
Item No.: 33
Site: Pantry-Long Room
Violation: The previously cleaned dumbwaiter used to transport food from the galley to the buffet area was soiled with food residue and dust.
Recommendation: Maintain the dumbwaiter in a clean condition daily.
Item No.: 33
Site: Buffet-
Violation: The locking pin recesses of the frame of the pass thru door to move the food from the galley to the crew mess were soiled with dust.
Recommendation: Ensure decks, bulkheads, deckheads, and attached equipment in food preparation, warewashing, pantries, and storage areas are cleaned as often as necessary.
Item No.: 33
Site: Bar-Outside Bar
Violation: The technical compartment under the soda machine was heavily soiled with soda syrup.
Recommendation: Clean the soiled areas under the soda machine more often and more thoroughly.
Item No.: 33
Site: Bar-Inside Bar
Violation: The technical compartment under the soda machine was heavily soiled with soda syrup.
Recommendation: Clean the soiled areas under the soda machine more often and more thoroughly.
Item No.: 33
Site: Provisions-Dry Store
Violation: There were exposed power cables, fire system lines, and refrigeration lines with some exposed insulation, making the deckhead difficult to clean.
Recommendation: Install exposed utility service lines and pipes, including lines for fire detection and protection systems, so they do not obstruct or prevent cleaning.
Item No.: 33
Site: Food Service General-Food Storage, Preparation and Service, and Bars
Violation: There were gaps at the conduit and pipe penetrations in deckheads, bulkheads, and technical compartments throughout the food areas.
Recommendation: Profile gaps where pipes penetrate bulkheads, deckheads and technical compartments of equipment, or install grommets to fully close these gaps.
Item No.: 36
Site: Buffet-
Violation: The light intensity over the handwashing station in the food worker side was less than 220 lux.
Recommendation: Ensure the light intensity is at least 220 lux (20 foot candles) on food preparation surfaces, and at a distance of 75 centimeters (30 inches) above the deck in food preparation areas, handwashing facilities, warewashing areas, equipment, and utensil storage, pantries, toilet rooms, and consumer self-service areas.
Item No.: 37
Site: Galley-Dishwash
Violation: There was condensate on the bulkhead of the ventilation hood in the dishwash area. There was heavy condensation also on the deckhead exhaust vent over the clean area. No condensate dripping was observed at the time of the inspection that could contaminate exposed clean items. This condition was also noted on the previous inspection.
Recommendation: Ensure exhaust ventilation hood systems in food preparation and warewashing areas--including components such as hoods, fans, guards, and ducting--are designed to prevent grease or condensation from draining or dripping onto food, equipment, utensils, linens, and single-service and single-use articles.
Item No.: 40
Site: Integrated Pest Management-Provisions Inspections - Integrated Pest Management (IPM) Plan
Violation: The IPM procedures contained in section 3.2 of the Health Procedures Manual specified provisions inspections for all supplies, and staff stated these were conducted, but there was no record of the provisions inspections as no log exists for that.
Recommendation: Routinely inspect incoming shipments of food and all other supplies for evidence of insects, rodents, and other pests. Maintain a record of these inspections onboard the vessel and make the record available for review during inspections.
Item No.: 40
Site: Integrated Pest Management-IPM Training
Violation: The Integrated Pest Management Officer onboard is responsible for application of pesticides and placement of baits and traps, but there was no formal training for this person and no records of any IPM training onboard.
Recommendation: Document the training of the pest-control personnel.
Item No.: 41
Site: Housekeeping-Outbreak Prevention and Response Plan (OPRP)
Violation: The yellow code trigger is 1 passenger or crew GI illness case, which on this vessel could equal 2%. The red code is initiated at 3 cases in either passenger or crew. The written OPRP specifies that sanitizing of hand contact points in yellow code is daily and in red code is every 2 hours, rather than continuously, as specified in the VSP Operations Manual whenever 2% GI illness is reached.
Recommendation: When the cumulative proportion of cases of AGE among passengers or crew members is equal or greater than 2%, ensure the outbreak management response includes cleaning and disinfecting all public areas, including handrails and restrooms, on a continuous basis.
Item No.: 41
Site: Housekeeping-Outbreak Prevention and Response Plan (OPRP)
Violation: There is passenger notification during red code in section 2.9 of the OPRP, but it only addresses Hotel Manager briefings and written instructions on handwashing and personal hygiene. There were no instructions on advising the passengers onboard of the GI illness elevation or outbreak, and no instructions on how oncoming passengers would be notified that there was a GI illness elevation or outbreak on the previous voyage.
Recommendation: Ensure each vessel has a written OPRP that details standard procedures and policies to specifically address AGE onboard. Include the following in the written OPRP: (4) Procedures for informing passengers and crew members of the outbreak. Ensure this section also includes procedures for notification of passengers embarking the vessel following an outbreak voyage or segment of a voyage.
Item No.: 41
Site: Housekeeping-Outbreak Prevention and Response Plan (OPRP)
Violation: There was a description of the use of chlorine to disinfect touch points and other surfaces in section 2.14 of the Health Procedures Manual under OPRP, but there was no chlorine concentration given (ppm or mg/L) and no specific contact time on these various surfaces.
Recommendation: Ensure each vessel has a written OPRP that details standard procedures and policies to specifically address AGE onboard. Include the following in the written OPRP: (3) Disinfectant products or systems used, including the surfaces or items the disinfectants will be applied to, concentrations, and required contact times. Ensure the disinfectant products or systems are effective against human norovirus or an acceptable surrogate (e.g., caliciviruses).
Item No.: 41
Site: Housekeeping-Public Toilets
Violation: The signs used to advise persons to open the exit door with the paper towels provided included several other directions on handwashing steps and procedures. Additionally, the waste bin inside the rooms was covered and required hand opening of the lid to discard paper towels. Nearly all had covered waste bin with foot pedal located outside the toilet rooms. With such an arrangement the bins with foot pedal should be located inside the toilet rooms and near to the doors. VSP additionally recommends that the signs be printed in white and instruction #6 be highlighted in a bright color to focus the users on that specific instruction.
Recommendation: With such an arrangement the bins with foot pedal should be located inside the toilet rooms and near to the doors. VSP additionally recommends that the signs be printed in white and instruction #6 be highlighted in a bright color to focus the users on that specific instruction.
Item No.: 43
Site: Housekeeping-Cabin Showerhead Disinfection
Violation: Although staff stated that shower heads were cleaned, de-scaled, and disinfected monthly with chlorine, there was no specified chlorine concentration or contact time either in writing or which could be clearly described.
Recommendation: Clean and disinfect shower heads every 6 months. Disinfect with an appropriate halogen-based disinfectant at 10 ppm for 60 minutes, or an equivalent CT value.
*Inspections scores of 85 or lower are NOT satisfactory
Vessel Sanitation Program