|
|
|
Item No.:
21
|
|
Site:
Galley-Veranda
|
|
Violation:
There was a cart stored in the galley which had two bumpers installed on one side that were not easily cleanable. The bumpers had small holes in them. The cart was removed during the inspection.
|
|
Recommendation:
Ensure nonfood contact equipment is maintained in good repair and proper adjustment including: (1) Equipment maintained in a state of repair and condition that meets the materials, design, construction, and operation specifications of these guidelines; (2) Equipment components such as doors, seals, hinges, fasteners, and kick plates are kept intact, tight, and adjusted in accordance with manufacturer's specifications. Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
|
|
|
Item No.:
21
|
|
Site:
Galley-Veranda
|
|
Violation:
There was a badly ripped and damaged mop stored in the cleaning locker of this galley. The pad was affixed to the handle with a rubber band. Staff removed it right away.
|
|
Recommendation:
Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Ensure nonfood contact equipment is maintained in good repair and proper adjustment including: (1) Equipment maintained in a state of repair and condition that meets the materials, design, construction, and operation specifications of these guidelines; (2) Equipment components such as doors, seals, hinges, fasteners, and kick plates are kept intact, tight, and adjusted in accordance with manufacturer's specifications.
|
|
|
Item No.:
21
|
|
Site:
Galley-Veranda Beverage Station
|
|
Violation:
The technical space where the hosing of the espresso machine fed in was not easily accessible for inspection or regular cleaning. Staff stated that the panels of the wine cabinet which was located in front of the technical space can be removed to access the area.
|
|
Recommendation:
Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Ensure nonfood-contact surfaces of food equipment comply with American National Standards Institute (ANSI), National Sanitation Foundation International (NSF International), or other internationally accredited food-equipment sanitation standards for materials, design, and construction.
|
|
|
Item No.:
21
|
|
Site:
Galley-Veranda Beverage Station
|
|
Violation:
The wine storage cabinet located below the counter-mounted espresso machine was unfinished in the corners and near the hinges leaving exposed void space, sharp edges, unsealed wood, gaps and seams which were absorbable and difficult to clean. These areas were clean to sight and touch.
|
|
Recommendation:
Ensure nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that require frequent cleaning are constructed of a corrosion-resistant, nonabsorbent, and smooth material. Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
|
|
|
Item No.:
21
|
|
Site:
Buffet-Veranda
|
|
Violation:
There was a cordless phone sitting on the pass-through service window which did not have easy to clean features including the cord, attachments and dock station. The phone and cord were clean to sight and touch.
|
|
Recommendation:
Ensure nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that require frequent cleaning are constructed of a corrosion-resistant, nonabsorbent, and smooth material. Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
|
|
|
Item No.:
33
|
|
Site:
Buffet-Veranda
|
|
Violation:
There were open perforations in the bulkhead area located to the right of the handwash sink near the pass-through service window. These were not easy to clean but were clean to sight and touch.
|
|
Recommendation:
Ensure decks, bulkheads, and deckheads in food preparation, warewashing, pantries, bars, and food and equipment storage areas are constructed and maintained for easy cleaning.
|
|
|
Item No.:
21
|
|
Site:
Galley-Beverage Service Station
|
|
Violation:
The juicer machine on the counter top in this area was not easily cleanable inside as there was a broken plastic swing piece. This piece had a make-shift repair constructed of thin wire. The machine and parts were clean to sight and touch. Staff presented documentation that showed the part to replace the make-shift repair had been ordered.
|
|
Recommendation:
Ensure nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that require frequent cleaning are constructed of a corrosion-resistant, nonabsorbent, and smooth material.
|
|
|
Item No.:
33
|
|
Site:
Galley-Flour Storage Area
|
|
Violation:
The deck beneath the flour store shelving was soiled with sugar and other food debris. This debris was in excess of what would be accumulated during normal operations in a 24 hour period.
|
|
Recommendation:
Ensure decks, bulkheads, deckheads, and attached equipment in food preparation, warewashing, pantries, and storage areas are cleaned as often as necessary.
|
|
|
Item No.:
19
|
|
Site:
Galley-Cold Pantry
|
|
Violation:
There was a metal container of cottage cheese which was labeled 'sour cream' and dated May19 stored in the under counter refrigeration unit in the island nearest the flour store. This container of cottage cheeses measured 47°F in multiple areas. This was discarded right away.
|
|
Recommendation:
Ensure containers holding food or food ingredients that are removed from their original packages for use on the vessel, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar are identified with the common name of the food.
|
|
|
Item No.:
21
|
|
Site:
Galley-Pastry/Bakery Area
|
|
Violation:
The upright aluminum rolling cabinet stored beside the stand mixer had clear tape covering a hole in the door panel. Tape is absorbable and difficult to clean. It was clean to sight and touch during the inspection.
|
|
Recommendation:
Ensure nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that require frequent cleaning are constructed of a corrosion-resistant, nonabsorbent, and smooth material. Design and construct nonfood-contact surfaces of equipment and utensils to be durable and to retain their characteristic qualities under normal use conditions.
|
|
|
Item No.:
21
|
|
Site:
Galley-Freezer #13
|
|
Violation:
The latch sensor button installed above the left door on this upright freezer unit was loose and protruding making it difficult to clean this area. The area was clean to sight and touch during the inspection.
|
|
Recommendation:
Ensure nonfood-contact surfaces are free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
|
|
|
Item No.:
33
|
|
Site:
Galley-Near Butcher Shop
|
|
Violation:
The deck construction outside the butcher shop and in front of the elevator was cut into a large square leaving gaps and seams along the edges. Staff stated that the cut out area had been there since the ship was built and was a hatch which was used to access the engine room. The cut out space was not easily cleanable or designed to galley standards. This was clean to sight and touch during the inspection.
|
|
Recommendation:
Ensure decks, bulkheads, and deckheads in food preparation, warewashing, pantries, bars, and food and equipment storage areas are constructed and maintained for easy cleaning. Do not use carpet in these areas.
|
|
|
Item No.:
33
|
|
Site:
Preparation Room-Deck Material
|
|
Violation:
The deck tiles in this area were in disrepair with chips and cracks as well as pitted and receded grout. The condition of the tiles made the area difficult to clean.
|
|
Recommendation:
Ensure decks, bulkheads, and deckheads in food preparation, warewashing, pantries, bars, and food and equipment storage areas are constructed and maintained for easy cleaning.
|
|
|
Item No.:
22
|
|
Site:
Galley-Potwash
|
|
Violation:
The hood-type potwash was out of service during the inspection. Staff stated that the machine broke the morning of the inspection. Crew were able to efficiently use the three compartment sinks to fit all dishes, pans and other cookware.
|
|
Recommendation:
Maintain warewashing equipment in good repair and proper adjustment, including: (1) warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines; (2) water pressure and water temperature-measuring devices are maintained in good repair and accurate within the intended range of use.
|
|
|
Item No.:
20
|
|
Site:
Galley-Blast Chiller
|
|
Violation:
The blast chiller had been broken for approximately two months. Staff presented documentation showing the procurement and order of the equipment. The scheduled delivery of this equipment was scheduled for a few days after the inspection. Staff and crew employed ice baths as an alternative cooling procedure in the interim.
|
|
Recommendation:
Ensure nonfood contact equipment is maintained in good repair and proper adjustment including: (1) Equipment maintained in a state of repair and condition that meets the materials, design, construction, and operation specifications of these guidelines; (2) Equipment components such as doors, seals, hinges, fasteners, and kick plates are kept intact, tight, and adjusted in accordance with manufacturer's specifications. Ensure equipment for cooling and heating food, and holding cold and hot food, is sufficient in number and capacity to maintain potentially hazardous food temperatures.
|
|
|
Item No.:
20
|
|
Site:
Galley-Refrigerator #2
|
|
Violation:
This upright refrigerator unit located near the combination oven in the hot galley was out of service during the inspection. The internal temperature measured at 46°F. There was no food product stored inside the refrigerator as staff identified the issue with the unit prior to the inspection.
|
|
Recommendation:
Ensure equipment for cooling and heating food, and holding cold and hot food, is sufficient in number and capacity to maintain potentially hazardous food temperatures.
|
|
|
Item No.:
33
|
|
Site:
Galley-Deck
|
|
Violation:
The deckhead/bulkhead junctures beneath upright refrigerator #1 and the cleaning locker on the opposite side (portside) had perforations, unfinished concrete and broken and damaged tile. Additionally, coving was missing in some places. The decking was clean to sight and touch.
|
|
Recommendation:
Ensure decks, bulkheads, and deckheads in food preparation, warewashing, pantries, bars, and food and equipment storage areas are constructed and maintained for easy cleaning. Cove all bulkhead/deck, equipment/deck, cabinet/deck, and deck sink coaming/deck junctures (including galleys, pantries, buffets, bars, waiter stations, dining room work counters, provisions, food storage rooms, equipment/utensil storage rooms, and toilet rooms intended for use by galley personnel).
|
|
|
Item No.:
08
|
|
Site:
Potable Water-Bunker Halogen Injection Port
|
|
Violation:
The halogen injection for the bunker water line was less than three meters (10 feet). The measured distance was 2.7 meters (9 feet). Staff corrected the distance during the inspection.
|
|
Recommendation:
Obtain water samples for halogen and pH testing from a sample cock and/or a halogen analyzer probe located on the bunker or production water line at least 3 meters (10 feet) after the halogen injection point and before the storage tank.
|
|
|
Item No.:
16
|
|
Site:
Galley-Cold Pantry
|
|
Violation:
There was a metal container of cottage cheese which was labeled 'sour cream' and dated May19 stored in the under counter refrigeration unit in the island nearest the flour store. This container of cottage cheeses measured 47°F in multiple areas. This was discarded right away.
|
|
Recommendation:
Except during preparation, cooking, or cooling, or when time is used as the public health control, maintain potentially hazardous foods at 57°C (135°F) or above, except that roasts may be held at a temperature of 54°C (130°F); or 5°C (41°F) or less.
Ensure refrigerated, ready-to-eat, potentially hazardous food is discarded if not consumed within 7 calendar days from the date of preparation or opening.
|
|
|
Item No.:
*
|
|
Site:
Medical-Acute Gastroenteritis (AGE) Surveillance Log
|
|
Violation:
On 30 April, a crew member had an onset of AGE symptoms beginning at 0100; however did not call or report to medical until 0800. Therefore, the isolation period did not begin at the illness onset time. This crew member was disciplined according to the ship's guidelines.
|
|
Recommendation:
When food employees meet the case definition for AGE, ensure the following actions are taken: (1) isolate in cabin or designated restricted area until symptom-free for a minimum of 48 hours; (2) follow-up with and receive approval by designated medical personnel before returning crew to work; (3) document date and time of last symptom and clearance to return to work. When nonfood employees meet the case definition for AGE, ensure the following actions are taken: (1) isolate in cabin or designated restricted area until symptom-free for a minimum of 24 hours; (2) follow-up with and receive approval by designated medical personnel before returning crew to work; (3) document the date and time of last symptom and clearance to return to work.
|
|
|
Item No.:
06
|
|
Site:
Potable Water-Analyzer Chart Records
|
|
Violation:
The charts for bunkering and production did not have consistent calibration notation by the officer in charge.
|
|
Recommendation:
Calibrate at the beginning of bunkering or production when halogen and pH analyzer-chart recorders are used in lieu of manual tests and logs. Ensure the calibration is recorded on the chart.
|
|
|
Item No.:
08
|
|
Site:
Potable Water-Potable to Technical Water Striping
|
|
Violation:
The potable water line after the reduced pressure (RPZ) assembly was striped blue indicating potable water. This was corrected right away.
|
|
Recommendation:
Stripe or paint potable water lines either in accordance with ISO 14726 (blue/green/blue) or blue only. Stripe or paint distillate and permeate lines directed to the potable water system in accordance with ISO 14726 (blue/gray/blue). Ensure no other lines have the above color designations. Stripe or paint these lines at 5 meters (15 feet) intervals and on each side of partitions, decks, and bulkheads, except where decor would be marred by such markings, including potable water supply lines in technical lockers. Do not stripe or paint potable water lines after reduced pressure assemblies as potable water. Uniquely identify all refrigerant brine lines in all galleys, pantries, and cold rooms to prevent cross-connections.
|
|
|
Item No.:
27
|
|
Site:
Other-Bridge Refrigeration Unit
|
|
Violation:
The refrigeration unit located on the bridge had an excess amount of dirt, coffee beans, sugar packets and old plastic in and around the base to deckhead juncture.
|
|
Recommendation:
Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
|
|
|
Item No.:
33
|
|
Site:
Other-Bridge Refrigeration Unit
|
|
Violation:
The refrigeration unit located on the bridge had an excess amount of dirt, coffee beans, sugar packets and old plastic in and around the base to deckhead juncture. Additionally, the refrigerator was resting on soiled carpet without the ability to be easily moved for cleaning purposes.
|
|
Recommendation:
Ensure decks, bulkheads, and deckheads in food preparation, warewashing, pantries, bars, and food and equipment storage areas are constructed and maintained for easy cleaning. Do not use carpet in these areas.
|
|