Skip directly to site content Skip directly to page options

Inspection Detail Report

  Advanced Search |  Ship Scored 100 |  Green Sheet  |  CDC Home |  VSP Home
 
Cruise Ship: AIDAluna Cruise Line: Aida Cruises Inspection Date: 10/14/2018 Inspection Score: 93
This cruise ship inspection report lists deficiencies found during the inspection. Additional information corresponding to each item number is available in the latest edition of the VSP Environmental Public Health Standards.

View/Print Summary Report  |  View/Print Corrective Action Statement
Item No.: 17
Site: Galley-Deck 10 Undercounter Refrigerator 4
Violation: Undercounter refrigerator # 4 contained 11 trays of mozzarella and sliced tomato and a hotel pan of mozzarella stored on temperature control with 7-day discard labels, but this unit was labeled as a time control unit and was on the time control plan.
Recommendation: Maintain a written time control plan(s) that ensures compliance with these guidelines on the vessel and make it available for review during inspections. Post a time control plan at each outlet where time control is used and ensure time control plan is accessible to all crew working at each outlet where time control is used. Ensure plan(s): (1) Include set-up and discard times for each outlet. Include all services and events where potentially hazardous foods are kept on time control. If used, ensure colored labels correspond to the discard times stated in the plan. (2) List all units (to include preparation counters, cabinets, compartments, and equipment) on time control, but only cabinets and compartments on time control must be physically labeled. (3) Describe or show the flow of potentially hazardous food from when last in temperature control to placement in time control and discard. Follow the time control plan or update the time control plan to match operations.
Item No.: 39
Site: Buffet-Deck 11
Violation: There was one live housefly and one small live fruit fly on the bulkhead near the milk dispenser. This area was open for service.
Recommendation: Effectively control the presence of insects, rodents, and other pests to minimize their presence in the food storage, preparation, and service areas and warewashing and utensil storage areas aboard a vessel.
Item No.: 39
Site: Dining Room-Deck 11 Rossini
Violation: There was one live fruit fly in the dining room. The area was not open for service.
Recommendation: Effectively control the presence of insects, rodents, and other pests to minimize their presence in the food storage, preparation, and service areas and warewashing and utensil storage areas aboard a vessel.
Item No.: 39
Site: Galley-Deck 11 Soda Carbonator Locker
Violation: At least 10 ants were crawling on the shelving, a soda syrup pouch spout, carbonator equipment, and syrup tubes in the soda carbonator locker that serviced the buffet. The buffet was open for service. Crew immediately began cleaning the area and pest management personnel was called.
Recommendation: Effectively control the presence of insects, rodents, and other pests to minimize their presence in the food storage, preparation, and service areas and warewashing and utensil storage areas aboard a vessel.
Item No.: 40
Site: Galley-Deck 11 Soda Carbonator Locker
Violation: There were at least three dead ants on the shelving of the soda carbonator locker for the buffet. The buffet was open for service. Crew immediately began cleaning the area and pest management personnel was called.
Recommendation: Inspect all food areas at a frequency that can quickly detect the evidence of pests, harborage conditions, cleanliness, and protection of outer openings. Remove dead or trapped insects, rodents, and other pests from control devices and the vessel at a frequency that prevents their accumulation or decomposition or the attraction of other pests.
Item No.: 20
Site: Galley-Deck 11 Crushed Ice Machine
Violation: There were at least three slotted screws on the food-contact surface of the crushed ice machine. Crew reported that all the crushed ice units were the same. Additionally, there was exposed insulation on the bottom of the top metal cover of the machine that was placed over the food-contact surface. Crew reported other machines had similar insulation, but that the food-contact surfaces of other machines were covered. Crew noted that this ice machine was not used for consumption; crew noted the ice was only used for cooling food.
Recommendation: Materials used in the construction of multiuse utensils and food contact surfaces of equipment must be: (1) durable, corrosion resistant, and nonabsorbent; (2) sufficient in weight and thickness to withstand repeated warewashing; (3) finished to have a smooth, easily cleanable surface; and (4) resistant to pitting, chipping, crazing, scratching, scoring, distortion and decomposition. Use only low profile, nonslotted, noncorroding, and easy-to-clean fasteners on food-contact surfaces and in splash zones. Prohibit the use of exposed slotted screws, Phillips head screws, or pop rivets in these areas.
Item No.: 21
Site: Galley-Deck 11 Freezer # 22
Violation: Upright freezer # 22 was out of service since 13 October 2018 due to an issue with the door seal. Crew expect the freezer to be fixed during the April 2019 dry dock. Crew reported they have enough freezing capacity without the unit.
Recommendation: Ensure nonfood contact equipment is maintained in good repair and proper adjustment including: (1) Equipment maintained in a state of repair and condition that meets the materials, design, construction, and operation specifications of these guidelines; (2) Equipment components such as doors, seals, hinges, fasteners, and kick plates are kept intact, tight, and adjusted in accordance with manufacturer's specifications.
Item No.: 20
Site: Galley-Deck 11 Freezer # 16
Violation: Undercounter freezer # 16 was out of service since 4 October 2018 due to an issue with the compressor. Crew reported they were waiting on spare parts with an unknown delivery date.
Recommendation: Food contact equipment must be maintained in good repair and proper adjustment: (1) Equipment must be maintained in a state of repair and condition that meets the materials, design, construction, and operating specifications of these guidelines.
Item No.: 17
Site: Galley-Deck 11
Violation: The milk unit on the coffee machine was on time control, milk was labeled with a four hour time label, and the unit was on the time control plan. However, the service times were not listed on the time control plan. The posted time control plan had blank service times that crew updated each day.
Recommendation: Maintain a written time control plan(s) that ensures compliance with these guidelines on the vessel and make it available for review during inspections. Post a time control plan at each outlet where time control is used and ensure time control plan is accessible to all crew working at each outlet where time control is used. Ensure plan(s): (1) Include set-up and discard times for each outlet. Include all services and events where potentially hazardous foods are kept on time control. If used, ensure colored labels correspond to the discard times stated in the plan. (2) List all units (to include preparation counters, cabinets, compartments, and equipment) on time control, but only cabinets and compartments on time control must be physically labeled. (3) Describe or show the flow of potentially hazardous food from when last in temperature control to placement in time control and discard.
Item No.: 26
Site: Bar-Deck 11 Beach
Violation: There was a bright pink line of debris along the edge of the clear plastic flap that switched between crushed and cubed ice. Crew wiped the area with an alcohol pad and the pad turned bright pink. Crew noted that the pink color was from when the technical crew drew a line to cut the material. Crew began cleaning the area. The unit was in service and the area was open for passengers at the time of inspection.
Recommendation: Ensure food contact surfaces of equipment and utensils are clean to sight and touch.
Item No.: 20
Site: Bar-Deck 11 Beach
Violation: There were three slotted screws on the food-contact surface of the ice cuber adjuster of the ice cube machine. The screws were not soiled.
Recommendation: Use only low profile, nonslotted, noncorroding, and easy-to-clean fasteners on food-contact surfaces and in splash zones. Prohibit the use of exposed slotted screws, Phillips head screws, or pop rivets in these areas.
Item No.: 19
Site: Buffet-Deck 10 Hotdog Station
Violation: The sneeze guard over the ketchup and mustard bowls was ineffective to protect the items from potential contamination. The counter of the station for the hotdogs was low in order to accommodate the tall hotdog heater. In this manner, the sneeze guard protected the top of the hot dog containers, but not the bowls that were placed low. The bowls were moved.
Recommendation: Protect food from contamination by storing the food: (1) Covered or otherwise protected; (2) In a clean, dry location; and (3) Where it is not exposed to splash, dust, or other contamination. Protect food on display from contamination by the use of packaging; counter, service line, or salad bar food guards; display cases; self-closing hinged lids; or other effective means. Install side protection for sneeze guards if the distance between exposed food and where consumers are expected to stand is less than 1 meter (40 inches). Protect condiments from contamination by keeping condiments in: (1) Dispensers designed to provide protection; (2) Protected food displays provided with the proper utensils; (3) Original containers designed for dispensing; OR (4) Individual packages or portions. Protect food from contamination that may result from a physical, chemical, biological origin.
Item No.: 08
Site: Galley-Deck 11
Violation: Crew were unable to show the inspector a backflow preventer for the coffee station on the center island. Crew were advised to install a new backflow preventer sanitization with 50 ppm chlorine for four hours.
Recommendation: Provide a comprehensive cross-connection control program. Protect the following connections to the potable water system against backflow with air gaps or mechanical backflow prevention devices: (10) food service equipment.
Item No.: 16
Site: Galley-Deck 10 Undercounter Refrigerator 4
Violation: There were 11 trays of mozzarella and sliced tomato that were dated 13-19 October; however, crew reported, and cooling logs showed, that the mozzarella was cooled on 11 October and the sliced tomatoes were cooled on 12 October. Crew corrected the discard labels.
Recommendation: Ensure refrigerated, ready-to-eat, potentially hazardous food: (1) Prepared on a vessel and held refrigerated for more than 24 hours is clearly marked at the time of preparation to indicate the date or day by which the food must be consumed (7 calendar days or fewer from the day the food is prepared). The day of preparation is counted as day 1. Ensure refrigerated, potentially hazardous, ready-to-eat food ingredients or a portion of a refrigerated, potentially hazardous, ready-to-eat food that is subsequently combined with additional ingredients or portions of food retains the date marking of the earliest or first-prepared ingredient.
Item No.: 19
Site: Buffet-Steakhouse
Violation: One of the side sneeze guards at the center island buffet was missing. The area was open for service. Passengers could stand less than 1 meter from bread, which was not effectively protected. Crew immediately placed a portable side sneeze guard.
Recommendation: Protect food from contamination by storing the food: (1) Covered or otherwise protected; (2) In a clean, dry location; and (3) Where it is not exposed to splash, dust, or other contamination. Protect food on display from contamination by the use of packaging; counter, service line, or salad bar food guards; display cases; self-closing hinged lids; or other effective means. Install side protection for sneeze guards if the distance between exposed food and where consumers are expected to stand is less than 1 meter (40 inches). Protect food from contamination that may result from a physical, chemical, biological origin.
Item No.: 35
Site: Galley-Deck 9 Market Place
Violation: Both rack-type conveyor dishwash units were leaking water onto the deck. Standing water pooled on the deck beneath the units.
Recommendation: Ensure black and gray water is discharged to the vessel's wastewater disposal system and does not pool on the deck.
Item No.: 22
Site: Galley-Deck 9 Market Place
Violation: Both rack-type conveyor dishwash units were leaking water onto the deck. Standing water pooled on the deck beneath the units.
Recommendation: Maintain warewashing equipment in good repair and proper adjustment, including: (1) warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines; (2) water pressure and water temperature-measuring devices are maintained in good repair and accurate within the intended range of use.
Item No.: 22
Site: Galley-Deck 9 Market Place
Violation: The inspector was unable to consistently measure 160°F or above at the plate surface of the left rack-type conveyor dishwash unit. During three measurements at the plate surface with a maximum registering tip-sensitive thermometer, the inspector measured 152°F, 140°F, and 150°F by sending the thermometer on a rack through the final rinse spray only. The crew measured 149°F and 129°F. The inspector also placed a maximum registering thermolabel sticker on a plate's food-contact surface which did not measure that the plate surface temperature was at least 160°F. The inspector also placed a maximum registering thermolabel sticker on the upper final rinse spray arm which did not register that the water was at least 180°F at the spray arm. Finally, the inspector used a rod with a thermocouple and was able to measure 160°F at the plate surface but did not measure 180°F at the upper final rinse spray arm. The machine gauge displayed 77°C (171°F) but the data plate required 82°C (180°F). When the machine gauge reached 83°C, the inspector measured 171°F at the upper spray arm with the rod and thermocouple. The unit had been in service when the inspector approached. Crew took the unit out of service until they could reach consistent final rinse temperatures.
Recommendation: Maintain warewashing equipment in good repair and proper adjustment, including: (1) warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines; (2) water pressure and water temperature-measuring devices are maintained in good repair and accurate within the intended range of use.
Item No.: 24
Site: Galley-Deck 9 Market Place
Violation: The inspector was unable to consistently measure 160°F or above at the plate surface of the left rack-type conveyor dishwash unit and did not measure 180°F at the upper final rinse spray arm. During three measurements at the plate surface with a maximum registering tip-sensitive thermometer, the inspector measured 152°F, 140°F, and 150°F by sending the thermometer on a rack through the final rinse spray only. The crew measured 149°F and 129°F. The inspector also placed a maximum registering thermolabel sticker on a plate's food-contact surface which did not measure that the plate surface temperature was at least 160°F. The inspector also placed a maximum registering thermolabel sticker on the upper final rinse spray arm which did not register that the water was at least 180°F at the spray arm. Finally, the inspector used a rod with a thermocouple and was able to measure 160°F at the plate surface but did not measure 180°F at the upper final rinse spray arm. The machine gauge displayed 77°C (171°F) but the data plate required 82°C (180°F). When the machine gauge reached 83°C, the inspector measured 171°F at the upper spray arm with the rod and thermocouple. The unit had been in service when the inspector approached. Crew took the unit out of service until they could reach consistent final rinse temperatures.
Recommendation: In a mechanical operation, ensure the temperature of the fresh hot water sanitizing rinse as it enters the manifold is not more than 90°C (194°F) or less than: (1) 74°C (165°F) for a stationary rack, single-temperature machine; (2) 82°C (180°F) for all other machines. Ensure the utensil surface temperature is not less than 71°C (160°F) as measured by an irreversible registering temperature indicator.
Item No.: 22
Site: Galley-Deck 3
Violation: There was floating debris in the sanitizing bucket near the left kettle. The area was in service. The bucket solution was replaced.
Recommendation: Ensure the wash, rinse, and sanitize solutions are maintained clean.
Item No.: 22
Site: Galley-Deck 3 Potwash
Violation: During the wash cycle of the front-loading potwash machine, the inspector measured 160°F with a thermocouple; however, the gauge displayed approximately 180°F.
Recommendation: Maintain warewashing equipment in good repair and proper adjustment, including: (1) warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines; (2) water pressure and water temperature-measuring devices are maintained in good repair and accurate within the intended range of use.
Item No.: 39
Site: Preparation Room-Deck 3
Violation: There was one small live fly in the area during operation.
Recommendation: Effectively control the presence of insects, rodents, and other pests to minimize their presence in the food storage, preparation, and service areas and warewashing and utensil storage areas aboard a vessel.
Item No.: 19
Site: Provisions-Deck 3 Corridor
Violation: The pallet of water was stored adjacent (within a few inches) of a large container of engine equipment. Additionally, there was a soiled rag stored on the water. No loading had occurred on the day of the inspection. This was corrected.
Recommendation: Protect food from contamination by storing the food: (1) Covered or otherwise protected; (2) In a clean, dry location; and (3) Where it is not exposed to splash, dust, or other contamination. Protect food from contamination that may result from a physical, chemical, biological origin.
Item No.: 37
Site: Galley-Deck 9
Violation: There was excessive condensation on the deckhead over the overshelf above the bain-marie. Food was present but covered. No dripping was noted. Steam was observed in the area. The food was on temperature control.
Recommendation: Ensure ventilation hood systems and devices are sufficient in number and capacity to prevent grease or condensation from collecting on bulkheads and deckheads.
Item No.: 33
Site: Galley-Deck 9
Violation: Excessive water accumulated on the deck between combination ovens # 3 and # 4. The source of the water was unknown.
Recommendation: Ensure decks, bulkheads, deckheads, and attached equipment in food preparation, warewashing, pantries, and storage areas are cleaned as often as necessary.
Item No.: 20
Site: Galley-Deck 9
Violation: Combination oven # 3 was leaking water which accumulated on the deck under the machine.
Recommendation: Food contact equipment must be maintained in good repair and proper adjustment: (1) Equipment must be maintained in a state of repair and condition that meets the materials, design, construction, and operating specifications of these guidelines.
Item No.: 35
Site: Galley-Deck 9
Violation: Combination oven # 3 was leaking water which accumulated on the deck under the machine. This was separate from the water between ovens 3 and 4.
Recommendation: Ensure black and gray water is discharged to the vessel's wastewater disposal system and does not pool on the deck.
Item No.: 39
Site: Galley-Deck 9 Potwash
Violation: There was one live fruit fly near the waste bins. The area was in service.
Recommendation: Effectively control the presence of insects, rodents, and other pests to minimize their presence in the food storage, preparation, and service areas and warewashing and utensil storage areas aboard a vessel.
Item No.: 22
Site: Galley-Deck 9 Potwash
Violation: During the wash cycle of the front-loading potwash machine, the inspector measured 163°F with a thermocouple; however, the wash gauge displayed 190°F.
Recommendation: Maintain warewashing equipment in good repair and proper adjustment, including: (1) warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction of these guidelines; (2) water pressure and water temperature-measuring devices are maintained in good repair and accurate within the intended range of use.
Item No.: 16
Site: Provisions-Deck 3 Dairy Store
Violation: The inspector measured the temperatures of potentially hazardous food items between 44°F and 52°F. The inspector used a tip-sensitive thermometer. Products included various yogurts, cheeses, creams, and eggs. Crew reported that no items were loaded during the day of the inspection. Crew and the inspector measured multiple items together and measured within 1°F or 1°C of each other. The error of accuracy of the inspector's thermometer was less than 1°F. Another inspector responded to the area to measure food temperatures and crew also used two of their thermometers to test food items that were designated for discard if measured out of the proper range. Crew were unable to discard all the food items and instead wrapped them and labeled them for discard. The inspector measured large items in multiple places. When a food item had multiple boxes and/or multiple packages inside a box, the inspector measured samples in the center and outer areas. The following foods were found out of temperature and were set on eight pallets and/or large carts for discard: 1) six 32 oz. containers of yogurt (four samples measured 50-51°F); 2) four 3 lb. containers of fresh mozzarella (three samples measured 46-47°F) ; 3) twelve 3 lb. blocks of cream cheese (two samples measured 48°F); 4) four gorgonzola wheels (two measured 48°F); 5) thirty-eight 32 oz. containers of garlic and herb cheese (two samples measured 48°F); 6) twenty-four 5 lb. containers of low fat cottage cheese (three samples measured 47°F); 7) fifty-six 5lb containers of yogurt (samples measured 47-49°F); 8) eight 10 lb. packages of cheddar cheese (two samples measured 48-49°F); 9) seventy-eight packages of 500g sliced cheese (samples measures 51°F); 10) two wheels of 6.16kg wine cheese (two samples measured 52°F); 11) eight 6.5 lb. mozzarella blocks (three samples measured 44-45°F); 12) eighty 5 lb. bags of shredded mozzarella cheese (six samples measured 44-48°F); 13) forty-two 32 oz. containers of yogurt (samples measured 46-47°F); 14) two hundred forty 1 quart containers of half and half cream (samples measured 50°F); 15) six 4 lb. containers of garlic spread (three samples measured 52°F); 15) fifteen boxes of sliced cheese (samples measured 7-8C); 16) two boxes of milk; 17) seventy-two 7.5 oz. containers of vegetable cream cheese (samples measured 52°F); 18) thirty-two 1 quart containers of buttermilk (samples measured 48°F); 19) thirty-two containers of mozzarella (two samples measured 46-49°F); 20) twenty-four 1 quart heavy whipping cream containers (samples measured 61°F); 21) forty 5 lb. containers of yogurt (samples measured 53°F); 22) sixty-four 5 lb. containers of cottage cheese (samples measured 49°F); 23) six 5 lb. blocks of Neufchatel cream cheese (samples measured 51°F); and 24) 300 dozen shell eggs (samples measured 47-51°F).
Recommendation: Except during preparation, cooking, or cooling, or when time is used as the public health control, maintain potentially hazardous foods at 57°C (135°F) or above, except that roasts may be held at a temperature of 54°C (130°F); or 5°C (41°F) or less.
Item No.: 20
Site: Provisions-Deck 3 Dairy Store
Violation: The Dairy Store was unable to maintain potentially hazardous foods at the proper temperature. Approximately eight pallets of potentially hazardous food measured 44-52°F by the inspector with a tip-sensitive thermometer. The ambient temperature thermometer near the door measured 52°F. The door was only open for a short time when the inspector instructed the door to be closed. The ambient temperature thermometer near the evaporative condenser measured 42°F. Crew lowered the ambient temperature of the room. After approximately 1.5 hours, an inspector returned to the room. The ambient temperature thermometer near the door measured 47°F and the inspector measured a temperature of 48°F. The inspector also measured the ambient temperature of the room in the back left corner where previously eggs had been stored, and the inspector measured 47°F.
Recommendation: Ensure equipment for cooling and heating food, and holding cold and hot food, is sufficient in number and capacity to maintain potentially hazardous food temperatures. Food contact equipment must be maintained in good repair and proper adjustment: (1) Equipment must be maintained in a state of repair and condition that meets the materials, design, construction, and operating specifications of these guidelines.
Item No.: 02
Site: Medical-Acute Gastroenteritis (AGE) Logs
Violation: The AGE Logs did not meet the requirements of the 2018 Operations Manual. This is a new requirement for the June 2018 VSP Operations Manual. Staff informed the inspector that management was working on producing a new version of the software.
Recommendation: Ensure the AGE surveillance log includes a header containing the following information about the voyage: (1) Vessel name; (2) Voyage number; (3) Date from; (4) Date to; (5) Total number of passengers; (6) Reportable total number of passengers ill; (7) Total number of crew; (8) Reportable total number of crew ill. Total number of passengers and total number of crew must be the totals at the beginning of the voyage (i.e., totals on ?date from?). Ensure the AGE surveillance log entry for each passenger or crew member contain the following information in separate columns: (1) Patient ID; (2) Date of the first medical visit or report to staff of illness; (3) time of the first medical visit or report to staff of illness; (4) person's last name; (5) person's first name; (6) person's age; (7) person's sex; (8) designation as passenger or crew member; (9) cabin number; (10) crew member position or job on the vessel, if applicable; (11) date of illness onset; (12) time of illness onset; (13) illness symptoms, including the presence or absence of the following selected signs and symptoms, with a separate column for each of the following: (a) number of episodes of diarrhea in a 24 hour period; (b) bloody stools (yes/no); (c) number of episodes of vomiting in a 24 hour period; (d) fever (yes/no); (e) abdominal cramps (yes/no); (f) headaches (yes/no); (g) myalgia (yes/no); (14) date of last symptom; (15) time of last symptom; (16) entry (yes/no) for whether a specimen was requested; (17) entry (yes/no) for whether a specimen was received; (18) entry (yes/no) for antidiarrheal medications sold or dispensed by designated medical staff; (19) entry (yes/no) for whether this was a reportable case; (20) presence of underlying medical conditions that may affect interpretation of AGE. If none, write ?none,? ?not applicable,? ?N/A,? or similar wording. Comments may also be added to the log in this column after the information about underlying illness. Ensure the AGE surveillance log contains the above information in the exact order and is entered in the template in Annex 13.2.2. Ensure that the log data is exported in the exact order as in the example template in Annex 13.2.2 with analyzable formats such as Excel or Access. Ensure that any additional data fields are entered only outside of the form margins when exported to VSP.
Item No.: 11
Site: Medical-Acute Gastroenteritis (AGE) Logs
Violation: On 3 September 2018, a nonfood worker experienced illness onset at 0300 and later reported to medical at 1215. This crewmember reported dining in the crew mess while symptomatic. The crew member received disciplinary actions.
Recommendation: When food employees meet the case definition for AGE, ensure the following actions are taken: (1) isolate in cabin or designated restricted area until symptom-free for a minimum of 48 hours; (2) follow-up with and receive approval by designated medical personnel before returning crew to work; (3) document date and time of last symptom and clearance to return to work.
Item No.: 08
Site: Potable Water-Water Hose Connections
Violation: In technical areas, white hoses were connected to the spigot type water connection. A plastic insert was observed inside the connection inside the spigot housing. This connection did not provide the atmospheric vent required on all backflow prevention devices.
Recommendation: Ensure a mechanical backflow prevention device has an atmospheric vent.
Item No.: 41
Site: Other-Bridge Toilet
Violation: There was no sign advising crew to use paper towels to open the door. There were no paper towels supplied in this toilet facility.
Recommendation: Provide the passenger and crew public toilets with a handwashing station that includes: (3) A method to dry hands. Post a sign advising users of toilet facilities to use hand towel, paper towel, or tissue to open the door unless the exit is hands free.
*Inspections scores of 85 or lower are NOT satisfactory
Vessel Sanitation Program