Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content
  • This form will generate a query of applicable standards and regulations related to various types of PPE. Leaving the search box empty will return all possible results.
  • To search for phrases, enclose search terms in quotation marks.
  • For more detailed information click the question mark button.
Search By
997 Results Found | Page 58 of 100
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2. Gloves and arm guards made of material other than chain mail"
    Title

    "Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2. Gloves and arm guards made of material other than chain mail"

    ISO 13999-2:2003 specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chain mail and rigid metal and plastics. They provide less cut and stab protection than the products specified in ISO 13999-1:2003 and are intended to be used only in work where the knife is not finely pointed or it is used only to cut away from the hand and arm.
    Description

    ISO 13999-2:2003 specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chain mail and rigid metal and plastics. They provide less cut and stab protection than the products specified in ISO 13999-1:2003 and are intended to be used only in work where the knife is not finely pointed or it is used only to cut away from the hand and arm.

    • Status: Current
    • Standard Type(s): Specification
    • Hazard Type(s): Physical, Puncture Hazard
    • PPE Type(s): Physical protective gloves, Body Armor
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3. Impact cut test for fabric, leather, and other materials"
    Title

    "Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3. Impact cut test for fabric, leather, and other materials"

    This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm guards. This test assesses the resistance of the test specimen to cutting by a sharp, straight knife-edge after the point of the test knife has perforated the test specimen. The length of the cut produced by the particular impact energy is proportional to the depth of penetration of the knife, which is easily measured. This test method provides information about the resistance of the product to stabbing cuts, slashing cuts, shearing cuts and impact cuts by acute edged objects that are not necessarily sharp. Abrasion by coarse sharp abraders such as road surfaces, concrete building blocks, or rough metal castings, is the superimposition of numerous small cuts. The results from this test give a good prediction of the resistance of products to these types of harsh abrasion. This test does not provide information about the resistance of the product to penetration by thorns or needles. Annex A of this part of ISO 13999 gives recommendations for the specification of impact cut tests on materials and products such as gloves and arm guards and gives the list of information which should be specified in the product standard in order to be able to apply this test.
    Description

    This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm guards. This test assesses the resistance of the test specimen to cutting by a sharp, straight knife-edge after the point of the test knife has perforated the test specimen. The length of the cut produced by the particular impact energy is proportional to the depth of penetration of the knife, which is easily measured. This test method provides information about the resistance of the product to stabbing cuts, slashing cuts, shearing cuts and impact cuts by acute edged objects that are not necessarily sharp. Abrasion by coarse sharp abraders such as road surfaces, concrete building blocks, or rough metal castings, is the superimposition of numerous small cuts. The results from this test give a good prediction of the resistance of products to these types of harsh abrasion. This test does not provide information about the resistance of the product to penetration by thorns or needles. Annex A of this part of ISO 13999 gives recommendations for the specification of impact cut tests on materials and products such as gloves and arm guards and gives the list of information which should be specified in the product standard in order to be able to apply this test.

    • Status: Current
    • Standard Type(s): Test Method
    • Hazard Type(s): Physical, Puncture Hazard
    • PPE Type(s): Physical protective gloves, Body Armor
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Protective clothing -- Protection against flame -- Limited flame spread materials, material assemblies and clothing"
    Title

    "Protective clothing -- Protection against flame -- Limited flame spread materials, material assemblies and clothing"

    ISO 14116:2015 specifies the performance requirements for the limited flame spread properties of all materials, all material assemblies, and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and thereby constituting a hazard. Additional requirements for clothing are also specified, including design requirements, mechanical requirements, marking, and information supplied by the manufacturer. When protection against heat hazards is necessary, in addition to protection against flame, this International Standard is not appropriate. International Standards such as ISO 11612 are to be used instead. A classification system is given for materials, material assemblies, and garments which are tested according to ISO 15025, Procedure A.
    Description

    ISO 14116:2015 specifies the performance requirements for the limited flame spread properties of all materials, all material assemblies, and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and thereby constituting a hazard. Additional requirements for clothing are also specified, including design requirements, mechanical requirements, marking, and information supplied by the manufacturer. When protection against heat hazards is necessary, in addition to protection against flame, this International Standard is not appropriate. International Standards such as ISO 11612 are to be used instead. A classification system is given for materials, material assemblies, and garments which are tested according to ISO 15025, Procedure A.

    • Status: Current
    • Standard Type(s): Specification
    • Hazard Type(s): Flame and Thermal
    • PPE Type(s): Thermal protective clothing
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Protective clothing for automobile racing drivers -- Protection against heat and flame -- Performance requirements and test methods"
    Title

    "Protective clothing for automobile racing drivers -- Protection against heat and flame -- Performance requirements and test methods"

    This international standard specifies test methods, performance requirements and design parameters for clothing for protection against heat and flame intended for drivers in automobile competitions. This International Standard concerns outer garments, under garments, socks, gloves and balaclava hoods. Shoes and helmets are excluded.
    Description

    This international standard specifies test methods, performance requirements and design parameters for clothing for protection against heat and flame intended for drivers in automobile competitions. This International Standard concerns outer garments, under garments, socks, gloves and balaclava hoods. Shoes and helmets are excluded.

    • Status: Current
    • Standard Type(s): Test Method, Specification
    • Hazard Type(s): Flame and Thermal
    • PPE Type(s): Thermal protective clothing
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Personal protective equipment for protection against falls from a height - Single-point anchor devices"
    Title

    "Personal protective equipment for protection against falls from a height - Single-point anchor devices"

    This international standard specifies requirements, test methods, and marking, labeling and packaging, as appropriate, of both permanent and temporary single-point anchor devices exclusively for the attachment of personal protective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travel restriction (work restraint). It is applicable only to anchor devices for PPEs that conform to ISO 10333-1, ISO 10333-2, ISO 10333-3 and ISO 10333-5.
    Description

    This international standard specifies requirements, test methods, and marking, labeling and packaging, as appropriate, of both permanent and temporary single-point anchor devices exclusively for the attachment of personal protective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travel restriction (work restraint). It is applicable only to anchor devices for PPEs that conform to ISO 10333-1, ISO 10333-2, ISO 10333-3 and ISO 10333-5.

    • Status: Current
    • Standard Type(s): Specification, Test Method
    • Hazard Type(s): Mechanical Hazards, Physical, Falls
    • PPE Type(s): Fall arresters
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Protective clothing for abrasive blasting operations using granular abrasives"
    Title

    "Protective clothing for abrasive blasting operations using granular abrasives"

    This European Standard specifies minimum requirements and test methods for protective clothing for abrasive blasting operations and for hand protection, for the treatment of surfaces with granular abrasives propelled by compressed air or by mechanical means. The protection against substances that develop during the blasting operation as well as connections between the protective clothing and the respiratory protective device are also covered. This European Standard does not apply to steam blasting, jet blasting and flame blasting operations.
    Description

    This European Standard specifies minimum requirements and test methods for protective clothing for abrasive blasting operations and for hand protection, for the treatment of surfaces with granular abrasives propelled by compressed air or by mechanical means. The protection against substances that develop during the blasting operation as well as connections between the protective clothing and the respiratory protective device are also covered. This European Standard does not apply to steam blasting, jet blasting and flame blasting operations.

    • Status: Current
    • Standard Type(s): Specification, Test Method
    • Hazard Type(s): Physical, Abrasive
    • PPE Type(s): Physical protective clothing
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Protective clothing - Protection against heat and flame - Method of test for limited flame spread"
    Title

    "Protective clothing - Protection against heat and flame - Method of test for limited flame spread"

    This International Standard specifies a method for the measurement of limited flame spread properties of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a small defined flame. This test method is not appropriate for materials that demonstrate extensive melting or shrinkage.
    Description

    This International Standard specifies a method for the measurement of limited flame spread properties of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a small defined flame. This test method is not appropriate for materials that demonstrate extensive melting or shrinkage.

    • Status: Current
    • Standard Type(s): Test Method
    • Hazard Type(s): Flame and Thermal
    • PPE Type(s): Thermal protective clothing
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Immersion suits - Part 1: Constant wear suits, requirements including safety"
    Title

    "Immersion suits - Part 1: Constant wear suits, requirements including safety"

    ISO 15027-1:2012 specifies performance and safety requirements for constant wear immersion suits for work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia. It is applicable for dry and wet constant wear immersion suits. Abandonment suits are not covered by ISO 15027-1:2012. Requirements for abandonment suits are given in ISO 15027-2. Test methods for immersion suits are given in ISO 15027-3.
    Description

    ISO 15027-1:2012 specifies performance and safety requirements for constant wear immersion suits for work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia. It is applicable for dry and wet constant wear immersion suits. Abandonment suits are not covered by ISO 15027-1:2012. Requirements for abandonment suits are given in ISO 15027-2. Test methods for immersion suits are given in ISO 15027-3.

    • Status: Current
    • Standard Type(s): Specification
    • Hazard Type(s): Environmental
    • PPE Type(s): Protective clothing, general
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Immersion suits - Part 2: Abandonment suits, requirements including safety"
    Title

    "Immersion suits - Part 2: Abandonment suits, requirements including safety"

    ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection. It is applicable for dry and wet abandonment suits. Constant wear suits are not covered by ISO 15027-2:2012. The requirements of constant wear suits are given in ISO 15027-1. Test methods are given in ISO 15027-3.
    Description

    ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection. It is applicable for dry and wet abandonment suits. Constant wear suits are not covered by ISO 15027-2:2012. The requirements of constant wear suits are given in ISO 15027-1. Test methods are given in ISO 15027-3.

    • Status: Current
    • Standard Type(s): Specification
    • Hazard Type(s): Environmental
    • PPE Type(s): Environmental protective clothing
  • International Organization for Standardization (ISO)
    Menu
    Standard Details
    Provide Feedback
    International Organization for Standardization (ISO)
    "Immersion suits - Part 3: Test methods"
    Title

    "Immersion suits - Part 3: Test methods"

    ISO 15027-3:2012 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits. Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027-2:2012.
    Description

    ISO 15027-3:2012 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits. Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027-2:2012.

    • Status: Current
    • Standard Type(s): Test Method
    • Hazard Type(s): Flame and Thermal
    • PPE Type(s): Immersion suite

PPE-Info Feedback

Please provide us with feedback so that we may improve PPE-Info in order to better serve you and the general public.

Required Field
- Contact Email Address is required and must be a valid email address.
- A Message is required in order to provide feedback.

In order to provide feedback you must verify your user status.

PPE-Info Standard Feedback

This feedback is directed towards NIOSH/NPPTL database managers and will not be transferred to standard development organization (SDO) contacts. If you have questions regarding the specific details of a standard, please contact the SDO directly.

Required Field
- Contact Email Address is required and must be a valid email address.
- A Message is required in order to provide feedback.

In order to provide feedback you must verify your user status.

Search By

You may chose how to search for standards by selecting an option from the Search By list.

  • Title: The search engine will match your search term against the title of a standard.
  • Standard Number: The search engine will match your search term against the standard number (eg ANSI 1000) of a standard.
  • Full Text: The search engine will match your search term against all fields in the database.
Filters (Advanced Search Only)

By default no options are selected for each filter. This means that all possible values for each filter type will be included in the search. You may add options under each filter to narrow the search results. If you hold the 'CTRL' key while selecting options the list will not close.

  • Personal Protective Equipment Category: A category that a piece of PPE falls into, such as Head Protection.
  • Hazard Category: A category of hazard that a piece of PPE protects against, such as Chemical.
  • Standard Organization: The name of the standard developing organization.
  • Standard Type: The type of standard, such as Test Method.
  • Standard Status: The current status of a standard.
  • SOC Code: A standard occupational classification major code that a piece of PPE deals with.
Full Text Search

Full Text Search will search for each term separated by white space. If you wish to search for a phrase you will need to surround the terms with quotation marks.

  • Fall Arrest: Will search for the word Fall and the word Arrest separately
  • "Fall Arrest": Will search for the phrase Fall Arrest
TOP

Loading, please wait