-
ASTM International (ASTM)ASTM International (ASTM)"Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating "Title
"Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating "
This test method rates the non-steady state thermal resistance or insulating characteristics of flame resistant clothing materials subjected to a continuous, standardized radiant heat exposure.DescriptionThis test method rates the non-steady state thermal resistance or insulating characteristics of flame resistant clothing materials subjected to a continuous, standardized radiant heat exposure.
- Status: Current
- Standard Type(s): Test Method
- Hazard Type(s): Flammability and Fires
- PPE Type(s): Thermal protective clothing
-
Reference(s):
- Referenced Standard: ASTM F1494 - 23(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF149423)
-
ASTM International (ASTM)ASTM International (ASTM)" Standard Test Method for Determining the Arc Rating of Materials for Clothing"Title
" Standard Test Method for Determining the Arc Rating of Materials for Clothing"
This test method is used to determine the arc rating of materials intended for use as flame resistant clothing for workers exposed to electric arcs that would generate heat flux rates of approximately 2100 kW/m2[50 cal/cm2s] using an open air arc.
DescriptionThis test method is used to determine the arc rating of materials intended for use as flame resistant clothing for workers exposed to electric arcs that would generate heat flux rates of approximately 2100 kW/m2[50 cal/cm2s] using an open air arc.
- Status: Current
- Standard Type(s): Test Method
- Hazard Type(s): Flame and Thermal
- PPE Type(s): Electrical protective clothing
- SOC Occupation(s): 33-2011 Firefighters, 47-2110 Electricians
- Reference(s):
- Testing Lab(s): ArcWear
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test"Title
"Standard Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test"
The test method is intended to provide a quantitative measurement about the effect of gloves on wearer finger dexterity by comparing the times required to perform a simple task with and without gloves.
DescriptionThe test method is intended to provide a quantitative measurement about the effect of gloves on wearer finger dexterity by comparing the times required to perform a simple task with and without gloves.
- Status: Current
- Standard Type(s): Test Method
- Hazard Type(s): Physical
- PPE Type(s): Gloves, general
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials"Title
"Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials"
This guide is intended to encourage thorough and consistent documentation of airborne particle penetration testing and its results.DescriptionThis guide is intended to encourage thorough and consistent documentation of airborne particle penetration testing and its results.
- Status: Current
- Standard Type(s): Guide
- Hazard Type(s): Biological
- PPE Type(s): Particulate protective clothing
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions "Title
"Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions "
This practice describes the recommended minimum information to be conveyed by the sellers to end users for the wearing, care, and maintenance of chemical protective clothing.DescriptionThis practice describes the recommended minimum information to be conveyed by the sellers to end users for the wearing, care, and maintenance of chemical protective clothing.
- Status: Current
- Standard Type(s): Practice
- Hazard Type(s): Chemical
- PPE Type(s): Chemical protective clothing
- SOC Occupation(s): 33-1010 First-Line Supervisors of Law Enforcement Workers, 33-1011 Sergeants, Corrections, 33-1021 Fire Lieutenants
- Reference(s):
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms"Title
"Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms"
This specification establishes requirements for devices intended to address the risk of injury and death associated with accidental falls through open windows by children five years old and younger.
This specification applies to window fall prevention devices, including window opening control devices, window fall prevention screens, and fall prevention window guards, that are to be used on operable windows, including those that are designated for emergency escape (egress) and rescue (ingress).
It is, however, not intended to meet the unique requirements of the Americans with Disabilities Act (ADA).DescriptionThis specification establishes requirements for devices intended to address the risk of injury and death associated with accidental falls through open windows by children five years old and younger.
This specification applies to window fall prevention devices, including window opening control devices, window fall prevention screens, and fall prevention window guards, that are to be used on operable windows, including those that are designated for emergency escape (egress) and rescue (ingress).
It is, however, not intended to meet the unique requirements of the Americans with Disabilities Act (ADA).- Status: Current
- Standard Type(s): Specification
- Hazard Type(s): Mechanical Hazards
- PPE Type(s): Fall arrest systems
- SOC Occupation(s): 49-9071 General Maintenance Workers
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Specification for Performance of Materials Used in Medical Face Masks"Title
"Standard Specification for Performance of Materials Used in Medical Face Masks"
This specification covers testing and requirements for materials used in the construction of medical face masks that are used in providing health care services such as surgery and patient care.DescriptionThis specification covers testing and requirements for materials used in the construction of medical face masks that are used in providing health care services such as surgery and patient care.
- Status: Current
- Standard Type(s): Specification, Test Method
- Hazard Type(s): Biological
- PPE Type(s): Face masks
- SOC Occupation(s): 29-1011 Physicians, Chiropractic, 29-1067 Surgeons, 29-1140 Registered Nurses
-
Reference(s):
- Referenced Standard: ASTM F1494 - 23(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF149423), ASTM F1862 / F1862M - 17(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF1862/F1862M17), ASTM F2101 - 23(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF210123), ASTM F2299 / F2299M - 24(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF2299/F2299M24), 29 CFR 1910.1030(https://wwwn.cdc.gov/PPEInfo/Standards/Info/29CFR19101030), 42 CFR 84.1(https://wwwn.cdc.gov/PPEInfo/Standards/Info/42CFR841)
- Testing Lab(s): Nelson Laboratories, Inc., Intertek
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus"Title
"Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus"
This test method is used to measure the bacterial filtration efficiency (BFE) of medical face mask materials, employing a ratio of the upstream bacterial challenge to downstream residual concentration to determine filtration efficiency of medical face mask materials.DescriptionThis test method is used to measure the bacterial filtration efficiency (BFE) of medical face mask materials, employing a ratio of the upstream bacterial challenge to downstream residual concentration to determine filtration efficiency of medical face mask materials.
- Status: Current
- Standard Type(s): Test Method
- Hazard Type(s): Biological
- PPE Type(s): Face masks
- SOC Occupation(s): 29-1060 Physicians and Surgeons, 29-1141 Registered Nurses
-
Reference(s):
- Referenced Standard: ASTM F1414 - 19(2023)(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF141419(2023))
- Testing Lab(s): Intertek, Nelson Laboratories, Inc.
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Specification for Arc Rated Eye or Face Protective Products"Title
"Standard Specification for Arc Rated Eye or Face Protective Products"
This product specification is used to determine the arc rating and specify the requirements for products intended for use as eye or face protection for workers exposed to electric arcs. The arc rating is determined in the test with an arc which has a heat flux value of 2100 kW/m2 [50 cal/cm2/s]. Products are tested as sold.
DescriptionThis product specification is used to determine the arc rating and specify the requirements for products intended for use as eye or face protection for workers exposed to electric arcs. The arc rating is determined in the test with an arc which has a heat flux value of 2100 kW/m2 [50 cal/cm2/s]. Products are tested as sold.
- Status: Current
- Standard Type(s): Specification
- Hazard Type(s): Electrical Hazards
- PPE Type(s): Electrical worker helmets, Eye-protectors
- SOC Occupation(s): 47-2110 Electricians
-
Reference(s):
- Referenced Standard: ANSI/ISEA Z87.1-2020(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ANSI/ISEAZ8712020), ASTM F1494 - 23(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF149423), ASTM F1506 - 22(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF150622), ASTM F1959 / F1959M - 24a(https://wwwn.cdc.gov/PPEInfo/Standards/Info/ASTMF1959/F1959M24a)
-
ASTM International (ASTM)ASTM International (ASTM)"Standard Specification for Headforms"Title
"Standard Specification for Headforms"
This standard specifies the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. Details of the exterior dimension of the headforms are included.DescriptionThis standard specifies the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. Details of the exterior dimension of the headforms are included.
- Status: Current
- Standard Type(s): Specification
- Hazard Type(s): Physical
- PPE Type(s): Headgear
- ««(https://wwwn.cdc.gov/PPEInfo/Search?page=1)
- «(https://wwwn.cdc.gov/PPEInfo/Search?page=38)
- …
- 34(https://wwwn.cdc.gov/PPEInfo/Search?page=34)
- 35(https://wwwn.cdc.gov/PPEInfo/Search?page=35)
- 36(https://wwwn.cdc.gov/PPEInfo/Search?page=36)
- 37(https://wwwn.cdc.gov/PPEInfo/Search?page=37)
- 38(https://wwwn.cdc.gov/PPEInfo/Search?page=38)
- 39
- 40(https://wwwn.cdc.gov/PPEInfo/Search?page=40)
- 41(https://wwwn.cdc.gov/PPEInfo/Search?page=41)
- 42(https://wwwn.cdc.gov/PPEInfo/Search?page=42)
- 43(https://wwwn.cdc.gov/PPEInfo/Search?page=43)
- …
- »(https://wwwn.cdc.gov/PPEInfo/Search?page=40)
- »»(https://wwwn.cdc.gov/PPEInfo/Search?page=83)
- Page last reviewed: February 21, 2024
- Page last updated: February 21, 2024
- Content source: