Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content
Print
ASTM D7246 - 06(2021)
ASTM International (ASTM)
Title

"Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves"

Description

This test method covers the detection of holes in polyethylene food service gloves. This test method shall not be used on any medical glove.

Standard Type(s)
Test Method

A definitive procedure that produces a test result: Examples of test methods include, but are not limited to: identification, measurement, and evaluation of one or more qualities, characteristics, or properties. A precision and bias statement shall be reported at the end of a test method.

Personal Protective Equipment
Hand and Arm Protection

All equipment and/or accessories (whether or not detachable) designed and manufactured specifically to protect the arm and/or the hand this includes all garments protecting the hand or part of the hand, including gloves, fingerless gloves, mittens, garments protecting the fingers only or the palm only, etc. Potential hazards include skin absorption of harmful substances, chemical or thermal burns, electrical dangers, bruises, abrasions, cuts, punctures, fractures and amputations.

  • Gloves, general
Hazards
Not Identified
  • NONE
SOC Codes
35-0000 Food Preparation and Serving Related Occupations
  • 35-2000 Cooks and Food Preparation Workers
    • 35-2021 Sandwich Makers
Standard References
Referenced Standard

ASTM D5151 - 19(2023) - Standard Test method for detection of holes in medical gloves

Conformity Assessment Notes

This specification covers certain requirements for natural rubber (Latex), synthetic rubber (Polychloroprene and Nitrile), and vinyl (PVC) disposable gloves for use in conducting single-use embalming procedures. This specification covers natural rubber (Latex), synthetic rubber (Polychloroprene and Nitrile), and Vinyl (PVC) disposable gloves that fit either hand, paired gloves, gloves by size, and gloves packed in bulk. An assessment to measure the chemical resistance performance of the glove can be made based on the ultimate permeation (breakthrough) of embalming chemicals through the glove material over a specified period of time. The chemical permeation tests described in this specification are intended to be "Type Tests" for these types of gloves. The material shall conform to the required quality performances, which include freedom from holes, width, length, thickness, physical properties before aging and after accelerated aging, powder amount, and permeation. Latex shall be tested for protein content and antigenic protein content.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.  Please see the full standard for complete details.

Comments

E1 NOTE—Added Section 11 editorially in January 2012 on Precision and Bias.

Additional References:

ASTM Standards

  • D5151 Test Method for Detection of Holes in Medical Gloves

ISO Standard

  • ISO 2859-1 Sampling Procedures and Tables for Inspection by Attributes
Testing Laboratories
ICS Laboratories, Inc - Brunswic, OH, 44212
Notes

A2LA ISO/IEC 17025
Contact

Phone Number: (330) 220-0515
Email: spfriem@icslabs.com

Accreditations

ISO 17025

Scope of Accreditation

ANSI/ISEA Z87.1-2020 , ASTM D120 - 22 , ASTM D5250 - 19(2023) , ASTM D6978 - 05(2023) , ASTM D7246 - 06(2021) , ASTM F1446 - 20 , ASTM F1383 - 20 , ASTM F1407 - 12(2017) , ASTM F1670 / F1670M - 17a , ASTM F1671 / F1671M - 22 , ASTM F739 - 20 , ASTM F903 - 18

Intertek - Cortland, NY, 13045
Contact

Phone Number: (607) 753-6711
Email: jason.allen@intertek.com

Accreditations

ISO 17025

Scope of Accreditation

ANSI/ISEA Z87.1-2020 , ASTM F2412 - 18a , ASTM D120 - 22 , ASTM D3577 - 19(2023) , ASTM D3578 - 19(2023) , ASTM D5250 - 19(2023) , ASTM D5712 - 15(2020) , ASTM D6319 - 19(2023) , ASTM D6978 - 05(2023) , ASTM D7246 - 06(2021) , ASTM F1446 - 20 , ANSI/AAMI PB70:2022 , ASTM F1342 / F1342M - 05(2022) , ASTM F1359 / F1359M - 22 , ASTM F1670 / F1670M - 17a , ASTM F1671 / F1671M - 22 , ASTM F1790 / F1790M - 15 (Reapproved 2021) , ASTM F2588 - 12(2020) , ASTM F739 - 20 , ASTM F903 - 18 , ASTM F1862 / F1862M - 17 , ASTM F2100 - 23 , ASTM F2101 - 23 , ASTM F2299 / F2299M - 24 , ANSI/AAMI PB70 - Class 4 , ANSI/AAMI PB70 - Class 3

Akron Rubber Development Laboratory, Inc. - Akron, OH, 44322-1016
Notes

Accredited Gloves Testing Methods ASTM Testing Methods

  •  ASTM D6319 - Standard Specification for Nitrile Examination Gloves for Medical Application
  • ASTM D6978 - Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
  • ASTM D7558 - Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
  • ASTM D120 — Standard Specification for Rubber Insulating Gloves
  • ASTM D3577 — Standard Specification for Rubber Surgical Gloves
  • ASTM D3578 — Standard Specification for Rubber Examination Gloves
  • ASTM D5151 — Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D6124 — Standard Test Method for Residual Powder on Medical Gloves
  • ASTM D5250 - Standard Specification for Poly (Vinyl Chloride) Gloves for Medical Application
  • ARDL 2140 - Lubricant Compatibility Testing on Gloves
  • ASTM D5712 - Analysis of Aqueous Extractable Protein in Latex, Natural Robber and Elastomeric Products Using the Modified Lowry Method
  • ASTM D6499 - Immunological Measurement of Antigenic Protein in Natural Rubber and Its Products
  • ASTM F739 — Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact
  • ASTM F1383 - Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact
  • ASTM F1670 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
  • ASTM F1671/F1671M — Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
  • ASTM F903 — Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
  • ASTM E96/E96M Water Vapor Transmission of Materials
  • ASTM D6977 — Standard Specification for Polychloroprene Examination Gloves for medical Application
  • ASTM D7246 — Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
  • ASTM D7329 — Standard Specification for Food Preparation and Food Handling Glove

The following link points to ARDL's searchable ISO 17025 Scope of Accreditations: 

https://www.ardl.com/sites/default/files/assets/scope-as-of-8-30-22.pdf
Contact

Phone Number: (330) 794-6600
Email: answers@ardl.com

Accreditations

ISO 17025

Scope of Accreditation

ASTM D120 - 22 , ASTM D3577 - 19(2023) , ASTM D3578 - 19(2023) , ASTM D5151 - 19(2023) , ASTM D5250 - 19(2023) , ASTM D5712 - 15(2020) , ASTM D6124 - 06(2022) , ASTM D6319 - 19(2023) , ASTM D6978 - 05(2023) , ASTM D7246 - 06(2021) , ANSI/AAMI PB70:2022 , ASTM F1342 / F1342M - 05(2022) , ASTM F1383 - 20 , ASTM F1670 / F1670M - 17a , ASTM F1671 / F1671M - 22 , ASTM F739 - 20 , ASTM F903 - 18 , ANSI/AAMI PB70 - Class 4 , ANSI/AAMI PB70 - Class 3

Nelson Laboratories, Inc. - Salt Lake City, UT, 84123
Notes

FDA Registered and ANSI-ASQ National Accreditation Board/ACLASS
Contact

Phone Number: (801) 290-7500
Email: sdrosner@nelsonlabs.com

Accreditations

ISO 17025

Scope of Accreditation

ASTM D120 - 22 , ASTM D3577 - 19(2023) , ASTM D3578 - 19(2023) , ASTM D5151 - 19(2023) , ASTM D5250 - 19(2023) , ASTM D5712 - 15(2020) , ASTM D6124 - 06(2022) , ASTM D6319 - 19(2023) , ASTM D6978 - 05(2023) , ASTM D7246 - 06(2021) , ANSI/AAMI PB70:2022 , ASTM F1342 / F1342M - 05(2022) , ASTM F1670 / F1670M - 17a , ASTM F1671 / F1671M - 22 , ASTM F903 - 18 , ASTM F1862 / F1862M - 17 , ASTM F2100 - 23 , ASTM F2101 - 23 , ASTM F1819 - 19 , ANSI/AAMI PB70 - Class 4 , ANSI/AAMI PB70 - Class 3

Print
TOP

Loading, please wait